Enter the LAN address | Allied Telesis NetScreen Routers specification

5.Enter the LAN address

Enter the IP address and mask of the SonicWALL’s interface to the LAN.

Then click the Next button.

6.Set up the DHCP server

In this step, you can set up the DHCP server on this router to service the office LAN you intend to connect to. Check that the wizard has chosen an appropriate range of addresses.

Then click the Next button.

Page 17 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 17

Allied Telesis NetScreen Routers manual Enter the LAN address, Set up the Dhcp server

Contents

AlliedWareTM OS Which products and software version does it apply to? Related How To NotesWhat information will you find in this document? Router Network Start How to configure the Allied Telesis router VPN tunnel 1. Open the Configuration Wizards Name the VPN connection Start the Site-to-Site VPN wizard Enter the remote site’s LAN IP address Enter the remote site’s WAN IP address Enter the shared secret key Check the settings Specify Peer IDs Finish the wizard Check the settings again Manager Access the Router How to configure the SonicWALL routerConnect a PC to the router Set the PC’s IP address Log on Browse to the router’s management GUI 14 AlliedWare OS How To Note VPNs with SonicWALL routers Set the time zone Customise the router and set up the networkChange the administrator password Choose the type of WAN address Enter the WAN settings Enter the LAN address Set up the Dhcp server Click the Close button Log in again Open the Address Objects summary Define the LAN subnet of the peer Define the address object Open the Custom Address Objects summary 22 AlliedWare OS How To Note VPNs with SonicWALL routers Create the VPN Return to the Configuration Wizards Select the networks for each end of the LAN Create the Site-to-Site policy Specify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Specify the Local and Peer IKE IDs Set the VPN IKE IDs and use Main Mode If necessary, restart the router Specify IKE Main Mode Ping the SonicWALL LAN How to test the tunnelCheck the tunnel status How to use the CLI instead of the GUI Wizard, for Remote Peer IP