Allied Telesis NetScreen Routers guide

The first time you configure your router, the GUI opens at the Configuration Wizard page.

After initial configuration, when you browse to the SonicWALL it may open at the System > Status page instead of the Configuration Wizard page.

Click on the Wizards button in the left-hand menu to open the Configuration Wizard page.

Page 14 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 14

Allied Telesis NetScreen Routers manual AlliedWare OS How To Note VPNs with SonicWALL routers

Contents

AlliedWareTM OS Which products and software version does it apply to? Related How To NotesWhat information will you find in this document? Network Router How to configure the Allied Telesis router Start VPN tunnel 1. Open the Configuration Wizards Start the Site-to-Site VPN wizard Name the VPN connection Enter the remote site’s WAN IP address Enter the remote site’s LAN IP address Check the settings Enter the shared secret key Specify Peer IDs Check the settings again Finish the wizard Manager Connect a PC to the router How to configure the SonicWALL routerAccess the Router Set the PC’s IP address Browse to the router’s management GUI Log on 14 AlliedWare OS How To Note VPNs with SonicWALL routers Set the time zone Customise the router and set up the networkChange the administrator password Enter the WAN settings Choose the type of WAN address Set up the Dhcp server Enter the LAN address Click the Close button Log in again Define the LAN subnet of the peer Open the Address Objects summary Open the Custom Address Objects summary Define the address object 22 AlliedWare OS How To Note VPNs with SonicWALL routers Return to the Configuration Wizards Create the VPN Create the Site-to-Site policy Select the networks for each end of the LAN Specify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Set the VPN IKE IDs and use Main Mode Specify the Local and Peer IKE IDs Specify IKE Main Mode If necessary, restart the router Ping the SonicWALL LAN How to test the tunnelCheck the tunnel status How to use the CLI instead of the GUI Wizard, for Remote Peer IP