AllTrade BAR916HG user manual Turn RADIO-CONTROLLED Clock on / OFF, Icon Meaning

you first set up the unit, and whenever you press RESET. Once complete, the reception icon will stop blinking.

In addition to the local time and calendar display, you can also select to display the corresponding time of 130 major world cities.

The icon shown in the Clock Area indicates 2 factors:

•Connection between the main unit and the sensor that collects RF signals ( )

•RF signal reception ( )

How these signals work together:

ICON	MEANING
	The unit has contact with the
	sensor and has synchronized
	the time.
	The unit has contact with the
	sensor but the time has not been
	synchronized.
	The unit has lost contact with
	the remote sensor but the time
	is synchronized.
	The unit has lost contact with the
	remote sensor and the time is not
	synchronized.

BAR916HG_EN_OP.indd 13

	EN
The unit cannot reach the remote
sensor.

NOTE To force a manual search for RF clock reception, press and hold SEARCH on the sensor (RTGR328N) for 2 seconds.

TURN RADIO-CONTROLLED CLOCK ON / OFF

If you wish to manually set the clock, you must first disable the radio-controlled feature. To do this, navigate to the Clock / Alarm Area. Then, press and hold on the main unit for 2 seconds. To enable it, navigate to

the Clock / Alarm Area, then press and hold	for 2
seconds.
RF clock enabled:

RF clock disabled:

13

5/8/06 11:23:36 AM