AllTrade BAR916HG user manual View Temperature And Humidity Area, Minimum / Maximum Records

EN

Data is collected and displayed approximately every 60 seconds.

VIEW TEMPERATURE AND HUMIDITY AREA

Press SEL to navigate to the Temperature and Humidity Areas.

Temperature data is given at the top; Humidity is below.

•To auto-scan between sensors, press and hold CH for 2 seconds. Each sensor’s data will be displayed for 3 seconds.

•To end auto-scan, press CH or MEM with the Temperature / Humidity Area selected.

NOTE If you select a sensor that collects only temperature data, the humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

•Press MEM repeatedly to view current, maximum and minimum records for the selected sensor.

•To clear the records, press and hold MEM for 2 seconds. A beep will sound to confirm that the memory has been cleared.

SELECT MEASUREMENT UNIT

Slide the °C / °F switch (inside the clock battery compartment), to the setting you want.

SELECT SENSOR CHANNEL

Press CH to switch between sensors 1-5.

The house icon shows the selected remote sensor.

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the temperature and humidity readings.

TREND RISING STEADY FALLING

TEMPERATURE

HUMIDITY

24

BAR916HG_EN_OP.indd 24

5/8/06 11:24:30 AM