2.Press CH to select user
3.Press and hold MODE for 2 seconds to enter the Skin Type Setting Mode of the selected user.
SKIN | TAN | BURN | HAIR | EYE | |
TYPE | COLOUR | COLOUR | |||
|
| ||||
|
|
|
|
| |
1 | Never | Always | Red | Blue | |
|
|
|
|
| |
2 | Sometimes | Always | Blonde | Blue / | |
Green | |||||
|
|
|
| ||
|
|
|
|
| |
3 | Always | Rarely | Brown | Grey / | |
Brown | |||||
|
|
|
| ||
|
|
|
|
| |
4 | Always | Never | Black | Brown | |
|
|
|
|
|
4.Press 
or 
to choose 1 of the 4 skin type settings. Then press MODE to confirm and enter the SPF Set Up Mode.
SPF | LEVEL OF PROTECTION |
|
|
1 - 11 | Low |
|
|
12 - 29 | Medium |
|
|
30 - 50 | High |
|
|
countdown. The remaining user UV exposure time
will display and the | will flash. |
7.When the countdown has reached “0”, an alarm will sound for 2 minutes. Press any button to turn the
alarmoff.The iconwillflashfor2minutesevenifyou have stopped the alarm sound.
MAXIMUM / MINIMUM MEMORY FOR UVI
To view the maximum and minimum memory for UVI:
1.Press SEL to navigate to the Barometer Area.
2.Press MODE to select the UV display.
3.Press MEM to show maximum, minimum and current UVI readings.
4.Press and hold MEM for 2 seconds to clear the UVI memory.
NOTE The UV sensor must be activated before you try and set the additional features. Please refer to the UVR128 User Manual for more information.
TEMPERATURE AND HUMIDITY
EN
5.Press 
or 
to increase or decrease the SPF value. Then press MODE to confirm and enter the UV Exposure Time Countdown Setting Mode.
6.Press 
or 
to enable or disable countdown. Press MODE to exit the UV Exposure Time Countdown Mode and start the exposure time
BAR916HG_EN_OP.indd 23
The weather station can display the following information from any of the 5 remote sensors:
•Current, minimum, and maximum temperatures and relative humidity percentages.
•Comfort level indicator and trend line (rising, falling, or steady).
23
5/8/06 11:24:27 AM
