< When not using a face panel >
1) Attaching an inner case to the headrest
Inner case mounting position
Headrest
Cut the headrest cloth about 10 mm to the inside of the inner case mounting position.
After inserting in the headrest, anchor these hooks in the cushion/urethane foam to keep the inner case in place. 
Inner case
Column
Bind wire
Cushion (170 x 10 x 3)
*Cut according to the opening of the inner case and attach to the inner front of the inner case.
Cushion (170 x 10 x 3) |
Inner case |
2) Attaching a monitor to the inner case
Inner case | Headrest |
|
Machine screw (M3 x 6)
Lock
Monitor
| Lock |
|
Lock case | Headrest |
|
| cloth |
|
|
| Inner case |
| Monitor | Cushion |
|
| (170 x 10 x 8) |
<Inner structure of headrest after installation> | ||
3) Detaching the monitor
Headrest
Monitor
Monitor lock release tool
Release the lock by inserting the tool, then draw the monitor out and remove it.
•Insert the tool with the face panel removed.
•If the headrest cloth is stuck between the inner case and monitor, pull out the headrest cloth, then insert the tool to release the lock.
