Alpine NVE-N852A, 68-00493Z15-B Changing to Another Product’s Source, Remote Control Sensor

Other Useful Features

Changing to Another Product’s Source

Remote Control Sensor

When used with touch panel compatible products such as IVA-D300/VPE-S431, sources connected to those products are also selectable.

1 Touch the option part of the display to display each source operation screen or source selection screen.

2 If each source operation screen is displayed, touch CONTROL on the upper right side of the screen to display the source selection screen.

3 Touch SOURCE.

SOURCE CONTROL

Remote sensor

•Receives the remote control signal from connected ALPINE products such as navigation and DVD players.

NAV.	AUX 1	AUX 2	SETUP	VISUAL	SOURCE	P 1/2
				EQ

<When the AUX IN 1 connection destination is IVA- D300 etc.>

Each time you touch “SOURCE”, the source changes.

The source depends on the settings and connections of the product used together with the IVA-D300.

Refer to the combined products instructions manuals.

<When the AUX IN 1 connection destination is VPE- S431>

After touching “SOURCE”, change the source with the following operation.

1)Touch “P 1/2”.

The screen changes to “P 2/2”.

2)Touch “ ” “ ” “ ” “ ” to select the desired source. Touch “ENTER”.

Touch “RETURN” to return to the previous screen.

•When “SETUP” is selected, the setup operation on the VPE-S431 can be performed in the same way as the source selection operation. For details on the setup items, see the VPE-S431’s operating instructions.

8-EN