4 Press the P. PTY button to activate the PRIORITY PTY mode again.
•To change the programme category, perform the step 3.
•To disable the PRIORITY PTY function, press the P. PTY button.
NOTE
In the PRIORITY PTY function, unlike in the T.INFO function, the volume does not increase during operation.
5 Press the "F" button to activate the normal
mode. The FUNC indicator will turn off.
NOTE
Operate the unit while the FUNC indicator is illuminated.
If no buttons are pressed within 5 seconds, the FUNC indicator will turn off.
Turning Emergency Alarm On or Off
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button repeatedly to select "PTY31" Each press of the f UP button scrolls the modes as shown.
→
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
NOTE
If you press the DN g button the display scrolls in reverse sequence.
3 Press the TUNE button repeatedly to select the PTY31 ON or PTY31 OFF mode.
In the PTY31 ON mode, the unit will show "ALARM" in the display when the unit receives the PTY31 (Emergency Broadcast) signal.
4 Press and hold the INTLZ button for at least 2 seconds to activate the selected mode.
Displaying Radio Text
Text messages from a radio station can be displayed.
1 Tune in a radio station that transmits text messages.
2 Press the "F" button. The FUNC indicator illuminates.
3 Press the R.TEXT button to activate the Radio Text mode. The display shows "WAIT" for a few seconds, then starts scrolling the text message. It continues until other operation is performed.
4 To cancel the Radio Text mode, press the R.TEXT button.
5 Press the "F" button to return to the normal operation mode. The FUNC indicator disappears from the display.
NOTES
•If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT" for 2 seconds.
•Operate the unit while the FUNC indicator is illuminated.
If no buttons are pressed within 5 seconds, the FUNC indicator will turn off.
