NOTE
This function cannot be performed when using a multi- changer switching device.
Erasing Disc Title/Station Title
1 Press the TITLE button to select the titling mode. Then, press and hold for at least 3 seconds.
2 Press and hold the -/J button for at least 2 seconds to activate the title scanning mode. The title in the display will blink.
3 Press the g DN or f UP button repeatedly until the title you want to erase is displayed.
4 Press and hold the -/J button for at least 2 seconds to erase the title displayed.
5 Press and hold the TITLE button for at least 3 seconds to cancel the title erasing mode.
NOTE
You cannot erase CD-TEXT.
Press the T.S.M. button to play the selected disc or station.
The unit will automatically search for the disc or station and begin play.

Titling Discs/Stations

It is possible to title your favorite CD's or radio stations.

1 Press the TITLE button and select the title display mode.

For details, see Displaying the Title/Text (page 12).

2 Press and hold the TITLE button for at least 3 seconds. The first character will blink.

3 Rotate the Audio Control knob to select the desired letter/numeral/symbol available for naming. (“A” for example).

4 Press the Audio Control button to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.

5 Repeat the steps 3 and 4 above to complete the titling. Pressing the Audio Control button after entering the 8th character, automatically stores the title into memory.

When entering a title of less than 8 characters (for example, 3 character title):

After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 6 to complete the title.

6 Press and hold the TITLE button for at least 3 seconds to record the title.

NOTES

You can enter 24 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show “FULL DATA.” At this point, no more titles can be stored.

The CD Changer title length or memory capacity varies depending upon the model being used.

To input a new title, one of the previously inputted titles must first be deleted.

When you want to erase a title, enter the “ ” symbol into all spaces.

The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be cancelled if no action is taken for over 10 seconds.

Removing power from the unit may delete these titles. Use caution when manipulating the power cord.

Searching for Titled Discs/Titled Stations

If a CD/Station is titled, you can do a search for it. (To title CDs or stations, refer to “Titling Discs/ Stations” on this page.)

1 When the unit is in radio or CD Changer mode, press and hold the T.S.M. button for at least 2 seconds. The title blinks in the display.

2 Press the g DN or f UP button to select the desired disc title from the CD changer, or the desired station title.

3

13-EN

Page 15
Image 15
Alpine cda-7873, CDA-7875, CDA-7876, CDA-7977 owner manual Titling Discs/Stations, Searching for Titled Discs/Titled Stations