Alpine CDA-7876 Sound Beep Guide Function, Turning Mute Mode On/Off, CD Text Scroll Setting

3	Press the TUNE button to toggle mode between
4	SUB-W ON and SUBW OFF.
	Press the SETUP button after setting the SUB-W
5	ON.
	Press the MODE button repeatedly to select the
	SUB-W mode.
	→ SUB-W		→ BALANCE
		VOLUME ←		FADER ←

Press the g DN or f UP button after selecting the SUB-W mode, and the subwoofer output phase is toggled SUBW NOR (0°) or SUBW REV (180°).

6 Rotate Audio Control knob until the desired sound is obtained in each mode.

Sound (Beep) Guide Function

This function will give audible feedback with varying tones depending upon the button pressed.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP button repeatedly to select “BEEP.”

Each press of the f UP button changes the modes as shown:

NOTE

If you press the g DN button the display scrolls in reverse sequence.

→NORMAL/HI-FI → AMBER* → DIM → SUB DEMO ← AUX ← SCR ← MUTE ←BEEP ←

∗CDA-7876 Only

3 Press the TUNE button to toggle the mode between BEEP ON and BEEP OFF.

NOTE

The initial setting at the factory is BEEP ON.

4 Press the SETUP button to set the selected mode.

Turning Mute Mode On/Off

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP button to select the MUTE mode. Each press changes the modes as shown:

→NORMAL/HI-FI → AMBER* → DIM → SUB DEMO ← AUX ← SCR ← MUTE ←BEEP ←

∗CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in reverse sequence.

3 Press the TUNE button to turn on or off the MUTE mode.

Each press toggles between the MUTE ON and OFF modes.

NOTE

The initial setting at the factory is “MUTE ON.”

4 Press the SETUP button again to return to normal operation.

CD Text Scroll Setting

This CD player has the ability to scroll the disc and track name recorded on CD-Text discs. The scrolling feature will work with names greater than 8 characters. This feature will not work for the 8 character titles that were input manually.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP button repeatedly to select “SCR”(SCROLL).

Each press of the f UP button changes the modes as shown:

→NORMAL/HI-FI → AMBER* → DIM → SUB DEMO ← AUX ← SCR ← MUTE ←BEEP ←

∗CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in reverse sequence.

3 Press the TUNE button to toggle mode between SCR AUTO and MANU.

•SCR AUTO: the display of CD text is scrolled continuously.

•SCR MANU: the display is scrolled only when a disc is loaded or when a track is changed and the text information exceeds 8 digits.

4 When the setting is completed, press the SETUP button to return to the normal mode.

NOTES

•Initial mode is “SCR MANU.”

•The unit scrolls only CD text names. The disc titles input manually (refer to page 13) cannot be scrolled.

•The display of CD text will scroll even for text less than 8 characters.

7-EN