XM Radio Operation (Optional)
SOURCE/ |
|
| BAND/ | ||||||
POWER |
|
| TEL. Rotary encoder | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
g f SEARCH | Preset buttons | DISP/ |
F/SETUP | (1 through 6) | TITLE |
Receiving XM Channels with the XM Receiver (Optional)
Checking the XM Radio ID Number
You need to provide XM with the unique XM Radio ID number for your XM Radio Receiver in order to subscribe to XM's programming.
This number is an 8 character alphanumeric number that is printed on a label directly on the XM Receiver.
It can also be displayed on the screen of the
1 While receiving XM1/XM2/XM3, press the g or f button to select channel “0.”
2 The unit alternately displays “RADIO ID” for 2 seconds, then the ID number for 10 seconds.
3 To cancel the ID number display, set the channel to other than “0.”
XM Satellite Radio∗ is the next generation of audio entertainment, with up to 100
An optional XM Satellite Radio Receiver
∗XM and its corresponding logos are trademarks of XM Satellite Radio Inc.
NOTES
•The controls on the
•The XM1, XM2 or XM3 band illuminates when in XM mode.
1Press the SOURCE/POWER button to select XM Mode.
2Press the BAND/TEL. button to select XM1, XM2 or XM3.
3Press the g or f button to select the desired channel. Holding the g or f buttons will change channels continuously.
Tips
There is another way to display your ID number.
1.Press and hold the F/SETUP button for at least 3 seconds.
2.Press the f or g button repeatedly to select “ID.”
3.Press the BAND/TEL. button to display your ID number.
4.After checking your ID number, press the F/SETUP button to return to the normal display.
NOTES
•You cannot use “O,” ”S,”” I,” or ”F” for the ID Number.
•You can check your ID number printed on the label on the package of your XM Satellite Radio Receiver
Storing XM Channel Presets
1 Press the BAND/TEL. button to select the desired band (XM1, XM2 or XM3) you want to store.
2 After tuning in the desired channel, press and hold any one of the Preset buttons (1 through 6) that you want to store the station on for at least 2 seconds. The selected station is stored.
3 Repeat the procedure to store up to 5 other channels onto the same band.
To use this procedure for other bands, simply select the band desired and repeat the procedure.
A total of 18 channels can be stored in the preset memory (6 channels for each band; XM1, XM2 and XM3).
NOTE
If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one.
Receiving Stored XM Channels
1 Press the BAND/TEL. button to select the desired band (XM1, XM2 or XM3).
2 Press the channel Preset button that has your desired satellite channel in memory.
