Alpine cda-9805, CDA-9807 owner manual Multi-ChangerSelection, 19-EN

2 Press the Disc Select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts.

NOTES

•After selecting the desired disc, you can operate in the same way as for the CDA-9807/CDA-9805 CD player.

For details, please see the CD Operation section.

•If the underlined portion of the “FUNC” indicator is illuminated, the Disc Select buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the procedure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press the “F” button. This changes the “D” indicator to “d.” Then press the desired Preset button. With the “F” button activated, the Preset buttons 1 to 6 will represent discs 7 to 12 respectively.

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA- 410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX).

1 Press the SOURCE/POWER button on the CDA-9807/ CDA-9805 to activate the CD Changer mode.

Alternatively, press the SOURCE button on the Remote Control (CDA-9807 only) to activate the CD Changer mode.

3 The CD Changer Selection mode remains active for 8 seconds after step 2 is performed. Press the BAND/ TEL. button until the desired CD Changer indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display will show “NO CHGR .”

Alternatively press the BAND button on the Remote Control until the desired changer indicator appears on the display.

4 To operate the selected changer, see “CD Player Operation” section.

NOTE

For further details about the external input (AUX) when using KCA-410C, see ”Setting the AUX Mode (V-Link)" on page 12.

SOURCE

BAND

2 Press the BAND button on the CDA-9807/CDA-9805 or the RUE-4187 to activate the CD Changer Selection mode.

19-EN