Alpine CDA-9807 MobileHub Link OperationOptional, About MobileHub Link, Telephone Mode ON/OFF

MobileHub™ Link Operation(Optional)

SOURCE/		BAND/
POWER	-/J8 TEL. Rotary encoder

			Preset buttons
g f 9
		F/SETUP	(1 through 6)
	SEARCH

•An outgoing call from a portable telephone is also possible. However, you cannot perform different operations at the same time from a portable telephone and CDA-9807/CDA-9805 as malfunction can result.

•With a Junction BOX connected outgoing, incoming, and sending history will also be recorded in the portable telephone.

•While telephoning, DEFEAT is also set to ON. When the call has finished, the unit returns to the setting which you previously set.

•The telephone volume can be adjusted from the CDA-9807/ CDA-9805. The volume you set during the call is memorized, and is automatically applied again on the next call.

•While telephoning or receiving incoming calls, press the

DISP/TITLE button to indicate the Network Operator display for 5 seconds.

About MobileHub™ Link

Connect a separately sold Junction Box and a portable telephone (available from Nokia) to control the incoming and outgoing calls of the portable telephone.

CAUTION

•Even with hands-free operation, a driver can be distracted during telephone operation or receiving a call. For the sake of safety, drivers are requested to refrain from operating the telephone while driving.

•For the sake of safety, operations other than incoming calls and Speed-Dial outgoing calls cannot be used.

NOTES

•If a portable telephone is connected, its address book, incoming and outgoing history are downloaded to the Junction Box.

•Please refer to the instruction manual of the Junction BOX.

Telephone Mode ON/OFF

1 Press and hold the BAND/TEL. button for at least 2 seconds to turn ON Telephone mode.

To turn OFF, press the BAND/TEL. button. See relevant pages for each item.

NOTES

•When a portable telephone is not connected, press and hold the BAND/TEL. button for at least 2 seconds. “NO PHONE” is displayed for about 2 seconds, then the mode returns to the original source mode

•When the portable telephone is taken off the Junction BOX during an incoming or outgoing call, or during a hands-free call, the call will be treated as an ordinary one by the portable telephone.

•When there is an incoming call while the power of CDA-9807/ CDA-9805 is OFF, the power of CDA-9807/CDA-9805 will turn ON automatically for a hands-free call.

•Even if the power of the portable telephone is OFF, when CDA-9807/CDA-9805 is set to the telephone mode, the power of the portable telephone will be turned ON.

•Even if the ACC power of the vehicle is turned OFF (even if the engine is stopped) during a hands-free call, the call is not disconnected, and an ordinary call by the portable telephone is possible.

•If there is an incoming call during operation (except an outgoing call or talking), operation mode will end and switch to the incoming or talking mode.

Incoming Calls

1 Press the :/J button to receive an incoming call.

2 Press the BAND/TEL. button or press the SOURCE/ POWER button to finish a call.

The telephone mode will end and return to the original source mode.

NOTES

•When the Automatic Calling mode is on, you can talk after 3 seconds of receiving the incoming call.

•The incoming call can be switched to Automatic Calling or Manual Calling.

1.Press and hold the F/SETUP button for at least 3 seconds.

2.Select the TEL mode by pressing the g or f button.

3.Press the BAND/TEL. button to change to TEL AUTO or

TEL MANU.

4.Press the F/SETUP button to return to normal mode.

•Press the BAND/TEL. or SOURCE/POWER button during an incoming call to disconnect it.

24-EN