Alpine CDA-9807 Titling Discs/Stations, Erasing Disc Title/Station Title, 10-EN, Basic Operation

Basic Operation

:/J Rotary encoder

g f DISP/TITLE

Titling Discs/Stations

It is possible to title your favorite CD's or radio stations. You cannot input titles on MP3/WMA discs.

1 Press the DISP/TITLE button and select the title display mode.

For details, see “Displaying the Title/Text” (page 9).

2 Press and hold the DISP/TITLE button for at least 3 seconds. The first character will blink.

3 Turn the Rotary encoder to select the desired letter/ numeral/symbol available for naming.

4 Press the Rotary encoder to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.

5 Repeat the steps 3 and 4 above to complete the titling. Pressing the Rotary encoder after entering the 8th character, automatically stores the title into memory.

When entering a title of less than 8 characters (for example, 3 character title):

After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 6 to complete the title.

6 Press the DISP/TITLE button to record the title.

NOTES

•If you cancel while entering a title, selected characters are not written.

•You can enter 18 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show “FULL DATA.” At this point, no more titles can be stored.

•The CD Changer title length or memory capacity varies depending upon the model being used.

•To input a new title, one of the previously inputted titles must first be deleted.

•When you want to erase a title, enter the “ ” symbol into all spaces.

•The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be canceled if no action is taken for over 10 seconds.

Erasing Disc Title/Station Title

1 Press the DISP/TITLE button to select the titling mode. Then, press and hold for at least 3 seconds.

2 Within 10 seconds press and hold the -/Jbutton for at least 2 seconds to activate the title scanning mode. The title in the display will blink.

3 Press the g or f button repeatedly until the title you want to erase is displayed.

4 Press and hold the -/Jbutton for at least 2 seconds to erase the title displayed.

5 Press the DISP/TITLE button to cancel the title erasing mode.

NOTES

•You cannot erase CD-TEXT.

•"NO DATA" is displayed for 2 seconds if the title is not input in step 2, or if the title is erased in step 4.

10-EN