Basic Operation
BAND/TEL. MODE/Rotary encoder
g | MUTE |
| |
f CENTER f | DISP/TITLE |
Adjusting Volume/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Defeat
1 Press the MODE (Rotary encoder) repeatedly to choose the desired mode.
Each press changes the modes as follows:
→BALANCE → FADER → DEFEAT
SUBWOOFER*← VOLUME ←
Volume : 0 ~ 35
Balance : L15 ~ R15
Fader: R15 ~ F15
Subwoofer: 0 ~ +15
NOTES
•If the MODE (Rotary encoder) is not pressed within 5 seconds after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER mode, the unit automatically returns to the VOLUME mode.
•*When the subwoofer mode is OFF, its level cannot be adjusted.
2 Turn the MODE (Rotary encoder) until the desired sound is obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS, TREBLE will return to the factory defaults, but MX will be turned off.
NOTE
Depending on the connected devices, some functions and display indications do not work.
Audio Mute Function
Activating this function will instantly lower the volume level by 20 dB.
1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about
20 dB.
Pressing the MUTE button again will bring the audio back to its previous level.
Displaying Time
1 Press the DISP/TITLE 
button repeatedly until the time is displayed.
Each press changes the modes as follows:
Radio mode |
|
|
| ||||||
| → | Radio frequency | → | Clock priority | → | TITLE mode |
|
| |
|
|
|
|
| mode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD Player/Changer modes
→Playingmode time → Clockmode priority → DISCmodeTEXT 
*
|
| TRACK | * | |
TITLE mode | ← |
| ← | |
TEXT mode |
| |||
|
|
|
| |
NOTES
•Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.
•When the power is off but the ignition key is on, press the DISP/TITLE 
button to display the time.
•∗ For
Setting Time
1 In the Clock priority mode, press and hold the DISP/ TITLE 
button for at least 3 seconds while the time is displayed. The time indication will blink.
2 Turn the Rotary encoder to adjust the hours while the time indication is blinking.
3
4 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the Rotary encoder.
