14-EN
01GB05CDE-9870R.fm
ALPINE CDE-9870R 68-05946Z90-A (EN)

Setting the Bass Control

You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press and hold A.SEL for at least 2 seconds to
activate the Sound Setting mode.
2
Press A.SEL repeatedly to select the BASS mode.
BASS TREBLE HPF BASS
3
-1Press BAND /TA to select the desired bass centre
frequency.
80 Hz 100 Hz 200 Hz 60 Hz 80 Hz
Emphasizes the displayed bass frequency ranges.
3
-2Press SOURCE/ to select the des ired bass
bandwidth.
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the centre frequency. A narrower setting will
boost only frequencies near the centre frequency.
3
-3*1Press or to select the desired bass level
(–7~+7).
You can emphasize or weaken the bass level.
4
Press and hold /ESC for at least 2 seconds to
return to normal mode.
•If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•The bass level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
bass frequency and bass bandwidth settings adjusted for one source
are effective for all other sources (FM, MW (LW), CD, etc.).
•The function is inoperable when DEFEAT is set to ON.
*1The adjustment can also be made by pressing AUDIO/RTN. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Loudness/Defeat” (page13).

Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press and hold A.SEL for at least 2 seconds to
activate the Sound Setting mode.
2
Press A.SEL repeatedly to select the TREBLE mode.
BASS TREBLE HPF BASS
3
-1Press BAND/TA to select the desired treble centre
frequency.
10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz
Emphasizes the displayed treble frequency ranges.
3
-2*2Press or to select the desired treble level
(–7~+7).
You can emphasize the treble level.
4
Press and hold /ESC for at least 2 seconds to
return to normal mode.
•If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
•The function is inoperable when DEFEAT is set to ON.
*2The adjustment can also be made by pressing AUDIO/RTN. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Loudness/Defeat” (page13).

Setting the Bass Centre Frequency

Setting the Bass Bandwidth

Setting the Bass Level

Setting the Treble Centre Frequency

Setting the Treble Level

01GB00CDE-9870R.book Page 14 Wednesday, November 1, 2006 10:47 AM