Setting the Auxiliary Data Field Display (XM only)
The XM Auxiliary Data Field (ADF) display can be switched on or off. There is no ADF function for the SIRIUS receiver.
1 | Press and hold FUNC./SETUP for at least 2 | ||
2 | seconds to enter the Setup mode. | ||
Turn the Double Action encoder | |||
| or Rotary encoder | ||
3 | TUNER mode, and then press /ENTER. | ||
Turn the Double Action encoder | |||
| or Rotary encoder | ||
4 | ADF, and then press | /ENTER. | |
Turn the Double Action encoder | |||
| or Rotary encoder | ||
| OFF, and then press | /ENTER. | |
| When setting to On, Auxiliary Data Field is displayed by | ||
| pressing VIEW (Refer to the “Changing the Display” section | ||
5 |
|
| |
Press and hold | for 2 seconds to return to |
normal mode.
•Pressing during the procedure will return to the previous mode.
Alpine introduces IMPRINT - the world’s first technology that thoroughly eliminates
When the IMPRINT audio processor
SOURCE | Double Action encoder |
FUNC./SETUP
BAND IMPRINT /ENTER PRESET
Changing MultEQ mode
MultEQ, developed by Audyssey Labs, automatically corrects the audio for the listening environment. The system is optimized for selected positions in the vehicle. To accomplish this, MultEQ must take measurements of the vehicles response characteristics. For details on the set up procedure, consult your authorized Alpine dealer.
1 | Press and hold IMPRINT for at least 2 seconds. | |
2 | Press /ENTER. |
|
3 | Turn the Double Action encoder to select the | |
| MultEQ mode, and then press /ENTER. | |
| OFF (Manual Mode) | CURVE 1 |
| CURVE 2 | OFF (Manual Mode) |
4 Press and hold IMPRINT for at least 2 seconds to return to normal mode.
•The Curve mode can be selected only when curve 1 and curve 2 are stored.
•When using MultEQ, MX,
•When an external audio processor is connected, the MultEQ function cannot be used.