Indication for SAT Receiver Mode
•The XM or SIRIUS antenna is not connected to the XM or SIRIUS radio module.
-Check whether the XM or SIRIUS antenna cable is attached securely to the XM or SIRIUS radio module.
•Radio is being updated with latest encryption code.
-Wait until encryption code is being updated. Channels 0 and 1 should function normally.
|
|
| (XM mode) |
|
|
| |
|
|
|
|
|
| ||
ACQUIRING SIGNAL | (SIRIUS mode) |
•XM or SIRIUS signal is too weak at the current location.
-Wait until the car reaches a location with a stronger signal.
•Radio is acquiring audio or program information.
-Wait until the radio has received the information.
(XM mode)
ACQUIRING SIGNAL (SIRIUS mode)
•The channel currently selected has stopped broadcasting.
-Select another channel.
•The user has selected a channel number that does not exist or is not subscribed to.
-The unit will revert back to the previously selected channel.
•There is no artist name/feature, song/program title, or additional information associated with the channel at that time.
-No action needed.
•If an error or other problem occurs.
-Change channels or consult your Alpine dealer.
Specifications
FM TUNER SECTION |
|
Tuning Range |
|
Mono Usable Sensitivity | 9.3 dBf (0.8µV/75 ohms) |
50 dB Quieting Sensitivity | 13.5 dBf (1.3µV/73 ohms) |
Alternate Channel Selectivity | 80 dB |
| 65 dB |
Stereo Separation | 35 dB |
Capture Ratio | 2.0 dB |
AM TUNER SECTION |
|
Tuning Range |
|
Sensitivity (IEC Standard) | 22.5 µV/27dB |
USB SECTION |
|
USB requirements | USB 1.1/2.0 |
Max. Power Consumption | 500mA |
USB Class | Mass Storage |
File System | FAT 12/16/32 |
MP3 Decoding | |
WMA Decoding | Windows Media™ Audio |
AAC Decoding | |
Number of Channels |
|
Frequency Response* |
|
Total Harmonic Distortion | 0.008% (at 1 kHz) |
Dynamic Range | 95 dB (at 1 kHz) |
>105 dB | |
Channel Separation | 85 dB (at 1 kHz) |
*Frequency response may differ depending on the encoder software/bit rate.
GENERAL |
|
Power Requirement | 14.4 V DC |
| |
Power Output | 16 W RMS × 4* |
*Primary amplifier ratings per CEA-2006 Standard
•Power output: measured at 4 Ohms and 1% THD+N
•S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum | 2 V/10 k ohms |
Bass | ±14 dB at 100 Hz |
Treble | ±14 dB at 10 kHz |
Weight | 1.0 kg (2 lbs. 3 oz) |
CHASSIS SIZE |
|
Width | 178 mm (7") |
Height | 50 mm (2") |
Depth | 156 mm |
NOSEPIECE SIZE |
|
Width | 170 mm |
Height | 46 mm |
Depth | 27 mm |
•Due to continuous product improvement, specifications and design are subject to change without notice.