Setting the Calendar
1 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP selection mode.
2 Turn the Double Action encoder
BT*1 AUDIO*2 GENERAL DISPLAY IPOD TUNER*3 BT
*1 Displayed only when INT MUTE is set to OFF, and the mode is set to other than BT AUDIO.
*2 Displayed only when an external audio processor is connected. For details, refer to the Owner’s Manual of the external audio processor.
*3 Only when HD Radio / SAT Radio receiver is connected.
3 Turn the Double Action encoder
4 Turn the Double Action encoder
5 | Press /ENTER. |
|
6 | Repeat steps 4 and 5 above to set month, day. | |
7 | Press and hold | for at least 2 seconds to return to |
| normal mode. |
|
•Pressing during the procedure will return to the previous mode.
•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.
Setting the Time
1 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP selection mode.
2 Turn the Double Action encoder
BT*1 AUDIO*2 GENERAL DISPLAY IPOD TUNER*3 BT
*1 Displayed only when INT MUTE is set to OFF, and the mode is set to other than BT AUDIO.
*2 Displayed only when an external audio processor is connected. For details, refer to the Owner’s Manual of the external audio processor.
*3 Only when HD Radio / SAT Radio receiver is connected.
3 Turn the Double Action encoder
4 Turn the Double Action encoder
5 | Press /ENTER. |
|
6 | Repeat steps 4 and 5 above to set minutes. | |
7 | Press and hold | for at least 2 seconds to return to |
| normal mode. |
|
8-EN
•Pressing during the procedure will return to the previous mode.
•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.
Displaying the Calendar/Time
Press VIEW.
The calendar/time is displayed. Pressing VIEW again will return to normal mode.
0 7 / 1 2 / 3 1 12:00•If an HD Radio Tuner is connected, text information can be displayed. Refer to “Changing the Display (HD Radio mode only)” (page 10).
•If an XM receiver is connected, the Auxiliary Data Field can be displayed. Refer to “Setting the Auxiliary Data Field Display (XM only)” (page 30).
Controllable With Remote Control
Point the optional remote control transmitter at the remote control sensor.
Remote control sensor
Connectable to Steering Remote Control Interface Box
You can operate this unit from the vehicle’s control unit when an Alpine Steering Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.