Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal preference.

For iDA-X200, the following setting can be made only when the IMPRINT audio processor (PXA-H100) is not connected.

1 Press and hold IMPRINT (iDA-X200 only) or SOUND (iDA-X300 only) for at least 2 seconds to activate the Audio Selection mode.

2 Turn the Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only) to select the TREBLE Adjustment mode, and then press

/ENTER.

SUBW SUBW SYSTEM* BASS TREBLE HPF SUBW

* Displayed only when subwoofer is ON.

Setting the Treble Level

3-1*2Turn the Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only) to select the desired treble level (–7~+7), and then press

/ENTER.

You can emphasize the treble level.

Setting the Treble Center Frequency

3-2 Turn the Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only) to select the desired treble center frequency, and then press /ENTER.

10.0kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz Emphasizes the displayed treble frequency ranges.

4 Press to return to normal mode.

•If no operation is performed for 15 seconds, the unit will return to normal mode automatically.

•If is pressed during setting, the unit returns to the previous item.

•The function is inoperable when DEFEAT is set to ON.

*2 The adjustment can also be made by pressing IMPRINT (iDA-X200 only) or SOUND (iDA-X300 only). Refer to “Adjusting Subwoofer/ Bass/Treble/Balance(Between Left and Right)/Fader (Between Front and Rear)/Loudness/Defeat” (page 19).

Adjusting the High Pass Filter

The High Pass Filter on this unit can be adjusted to suit your personal taste.

For iDA-X200, the following setting can be made only when the IMPRINT audio processor (PXA-H100) is not connected.

1 Press and hold IMPRINT (iDA-X200 only) or SOUND (iDA-X300 only) for at least 2 seconds to activate the AUDIO selection mode.

2 Turn the Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only) to select the HPF Adjustment mode, and then press /ENTER.

SUBW SUB SYSTEM* BASS TREBLE HPF SUBW

* Displayed only when subwoofer is ON.

3 Turn the Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only) to select the desired HPF frequency, and then press /ENTER.

OFF 80 (Hz) 120 (Hz) 160 (Hz)

4 Press to return to normal mode.

•If no operation is performed for 15 seconds, the unit will return to normal mode automatically.

•If is pressed during setting, the unit returns to the previous item.

•The function is inoperable when DEFEAT is set to ON.

Operating the External Audio Processor

You can call up the preset memory of the external audio processor from this unit.

1 Press and hold PRESET for at least 2 seconds to call the external audio processor mode when the external audio processor is connected.

The AP Preset screen is displayed.

2 Turn the Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only) to select the preset number, and press /ENTER.

•For the operation of external audio processor, refer to the Owner’s Manual of the external audio processor you purchased.

21-EN