Samsung SRP275APG user manual DIP Switch setting for CitizeniDP 3550 mode

▌3.1.2 DIP Switch setting for Citizen(iDP 3550) mode

• DIP Switch 1

Switch		Function				ON		OFF	Default
1-1	Emulation Selection (*1)				Refer to the following table				OFF
1-2
1-3	Auto cutter			Enable			Disable		OFF
1-4	CBM command				CBM2 mode			CBM1 mode	OFF
					(iDP3530 system)			(iDP3540 system)
1-5	International characters (*2)				Refer to the following table				ON
1-6
1-7
1-8	CR mode				CR		CR+LF		OFF
• DIP Switch 2 (RS232C serial interface model)
Switch		Function				ON		OFF	Default
2-1	Word length					8 bits		7 bits	ON
2-2	Parity check					Disable		Enable	ON
2-3	Parity selection					ODD		EVEN	ON
2-4	Hand shaking				DTR/DSR			XON/XOFF	ON
2-5	Baud rate selection (*3)					Refer to the following table			OFF
2-6
2-7	Near end switch					Enable		Disable	OFF
2-8	Mechanism type					Graphic		Character	OFF
NOTES
(*1) Emulation Selection (DSW 1-1 and 1-2)
Emulation		1-1	1-2
EPSON		OFF	OFF
STAR		OFF	ON
CITIZEN		ON	OFF
EPSON-KP		ON	ON

- EPSON-KP(EPSON Kitchen Printer mode) : A alarm is generated by printer after auto cutting and in paper end error.

(*2) International Character Selection

	No.	DSW 1-5	DSW 1-6		DSW 1-7			Code page
	Country
	U.S.A.	ON		ON		ON	Page 0	(PC437 : U.S.A.)
	France	OFF		ON		ON
	Germany	ON		OFF		ON	Page 2	(PC850 : Multilingual)
	U.K.	OFF		OFF		ON
	Denmark	ON		ON		OFF	Page 5	(PC865 : Nordic)
	Sweden	OFF		ON		OFF
	Italy	ON		OFF		OFF	Page 2	(PC850 : Multilingual)
	Windows Code	OFF		OFF		OFF	Windows Code
(*3) Baud rate selection (Transmission speed)
	Transmission	2-5		2-6
	2400 baud	ON		ON
	4800 baud	OFF		ON
	9600 baud	OFF		OFF
	19200 baud	ON		OFF

3-2