Samsung SRP275APG user manual FS p, FS q, GS a, Paper, Type

CHAPTER 4 Control commands list

FS p

[Name]	Print NV bit image
[Format]	ASCII	FS	p	n	m
	Hex	1C	70	n	m
	Decimal	28	112	n	m
[Range]	1 ≤ n ≤ 255

	m = 0, 1, 48, 49
[Description]	Prints a NV bit image n using the mode specified by m.
	m	Mode	Scaling for horizontal	Scaling for vertical
	0, 48	Normal	x 1	x 1
	1, 49	Double-width	x 2	x 1

FS q

[Name]	Define NV bit image
[Format]	ASCII		FS	q	n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
	Hex		1C	71	n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
	Decimal		28	113	n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Range]	1	≤ n ≤ 255
	1	≤ (xL + xH x256) ≤ 1023( 0 ≤ xL ≤ 255, 0 ≤ xH ≤ 3)
	1	≤ (yL + yH x256) ≤ 288( 0 ≤ yL ≤ 255, yH = 0.1)
	1	≤ d ≤ 255
	k = ( xL + xH x 256) x ( yL + yH x 256) x 8
	Total defined data area is 256 KB
[Description]	Defines NV bit image specified.

-n specifies the number of defined NV bit images.

-xL, xH specifies ( xL + xH x 256) bytes in the horizontal direction for the NV bit image you defined.

-yL, yH specifies ( yL + yH x 256) bytes in the vertical direction for the NV bit image you defined.

-d specifies the definition data for the NV bit image.

-k indicates the number of the definition data. k is a parameter for an explanation; therefore, it does not need to be transmitted.

GS ( A

[Name]	Execute test print
[Format]	ASCII	GS	(	A	pL	pH	n	m
	Hex	1D	28	41	02	00	n	m
	Decimal	29	40	65	2	0	n	m
[Range]	1 ≤ m ≤ 3, 49 ≤ m ≤ 3
[Description]	Executes a specified test print.

-pL and pH specify the number of parameters following n to (pL + pH x 256) bytes.

-n specifies paper used for the test print as follows:

nPaper

0, 48	Basic sheet (paper roll)
1, 49	Paper roll
2, 50

- m specifies a type of the test print as follows:

mType

1, 49 Hexadecimal dump

2, 50 Printer status printing

3, 51 Rolling pattern

4-17