Bit, Decimal Function | Samsung SRP275APG specification

[Notes]	• Basic ASB status is 4-byte configuration [first byte - fourth byte].
	• The status to be transmitted are as follows:
	• First byte (printer information)

	Bit			On/Off		Hex		Decimal				Function
	0			Off	00			0			Not used. Fixed to Off.
	1			Off	00			0			Not used. Fixed to Off.
	2			Off	00			0			Drawer kick-out connector pin 3 is LOW.
	2			On	04			4			Drawer kick-out connector pin 3 is HIGH.
				On	04			4			Drawer kick-out connector pin 3 is HIGH.
	3			Off	00			0			On-line.
	3			On	08			8			Off-line.
				On	08			8			Off-line.
	4			On	10			16			Not used. Fixed to On.
	5			Off	00			0			Rear cover is close
	5			On	20			32			Rear cover is open
				On	20			32			Rear cover is open
	6			Off	00			0			Paper is not being fed by the paper feed button.
	6			On	40			64			Paper is being fed by the paper feed button.
				On	40			64			Paper is being fed by the paper feed button.
	7			Off	00			0			Not used. Fixed to Off.
	• Second byte (printer information)

	Bit			On/Off		Hex		Decimal				Function
	0			Off	00			0				Not used. Fixed to Off.
	1			Off	00			0				Not used. Fixed to Off.
	2			Off	00			0				No mechanical error.
	2			On	04			4				Mechanical error.
				On	04			4				Mechanical error.
	3			Off	00			0			No auto cutter error.
	3			On	08			8			Auto cutter error occurred.
				On	08			8			Auto cutter error occurred.
	4			Off	00			0				Not used. Fixed to Off.
	5			Off	00			0			No unrecoverable error.
	5			On	20			32				Unrecoverable error.
				On	20			32				Unrecoverable error.
	6			Off	00			0				No automatically recoverable error.
	6			On	40			64				Automatically recoverable error occurred.
				On	40			64				Automatically recoverable error occurred.
	7			Off	00			0				Not used. Fixed to Off.
	• Third byte (paper sensor information)

	Bit			On/Off		Hex		Decimal				Function
	0,1			Off	00			0				Paper near end sensor: paper adequate.
	0,1			On	03			3				Paper near end sensor: paper near end.
				On	03			3				Paper near end sensor: paper near end.
	2,3			Off	00			0				Paper end sensor: paper present.
	2,3			On		0C		12				Paper end sensor: no paper present.
				On		0C		12				Paper end sensor: no paper present.
	4			Off	00			0				Not used. Fixed to Off.
	5			Off	00			0				Not used. Fixed to Off.
	6			Off	00			0				Not used. Fixed to Off.
	7			Off	00			0				Not used. Fixed to Off.
	• Forth byte

	Bit			On/Off		Hex		Decimal				Function
	0			On	01			1			Not used. Fixed to On.
	1			On	02			2			Not used. Fixed to On.
	2			On	04			4			Not used. Fixed to On.
	3			On	08			8			Not used. Fixed to On.
	4			Off	00			0				Not used. Fixed to Off.
	5			Off	00			0				Not used. Fixed to Off.
	6			Off	00			0				Not used. Fixed to Off.
	7			Off	00			0				Not used. Fixed to Off.

4-26

Image 62

Samsung SRP275APG user manual Bit, Decimal Function

Contents

USER’S Manual Page EMC and Safety standards Applied CE Marking Safety precautions To Unplug Table of contents Appendix B Connectors Appendix a Code table Front view Rear viewPage Page Unpacking Choosing a place for the printer Connecting the interface cable and drawer kick-out cable Connecting the cablesConnecting the AC adaptor Connect the AC adapter according to the following procedure Installing the ribbon cassette Installing the paper roll Changing the paper width Installing the wall mount Option Error LED Red Color Using the operation panelControl panel Power LED Green Color Paper OUT LED Red Color Self test Error Description Error LED blinking pattern Recovery Error LED blinking patternRecoverable errors Printer does not start printing If any of the lights are on, please check the following Self test Printer stops printingYou want to check the operation of the printer by itself You want to check a software program To use the hexadecimal dump feature, follow these stepsPrinting is poor Hexadecimal dump Setting the DIP Switch DIP Switch setting for EpsonESC/POS mode DIP Switch setting for CitizeniDP 3550 mode International Character Selection DSW Code Country DIP Switch setting for StarSP500 mode Changing the DIP Switch setting Only Font B available Memory Switch Function OffCode page selection MSW Character Table Customize value Function Selectable value Paper roll width Serial communication Function Selectable value Memory Switch Setup Mode Example of Memory Switch setup sheet Procedure of Memory Switch setting Function Class Memory Switch setting for Star modeSettings Default Settings FF Command Function Selection MSW Function Memory Switch BitCountry Specifications MSW 0-4 = Precautions for selecting Option MSW Near end switch Function Memory Switch Bit FunctionNear end switch Function Contextual Auto-cut Function MSW3-9 MSW3-8 Character Table CR Command Functions MSW3-1 MSW3-0 CR IgnoredCharacter Table Settings Once Command notation Explanation of term Exception processing Undefined commandsSettings outside the defined range Undefined codes Command Description Hex Commands for SRP-275 seriesCommands list for Epson mode TM-U220 Command description for Epson mode TM-U220 When auto line feed is disabled Hex FunctionStatus Bit Binary Hex Decimal Status Bit Connector pinDLE DC4 fn = Hex Decimal Function ESC % Horizontal Mode Number of bits Dot densitySet Maximum number of dots Mode Dot DSW1-8 on Density ESC = ESC @ ESC J Font Justification ESC aESC c ESC d ESC e ESC ESC gESC g n ESC m ESC t ESC pESC r ESC u Hex Decimal Status GS a FS pFS q Paper GS C Function Description GS C p L p H m fn b Function GS E Real-time command typeGS D Setting value b Function GS E pL pH fn d1 d2 Function GS E p L p H fn a Function Type of customized value GS E p L p H fn a d1...dk Communication condition Printer ID Specification Bixolon Hex Decimal Status for ASB Decimal Function GS r Commands list for Star mode SP500 DC2 ESC L Commands list for Citizen mode iDP3550/3551 Command Description Hexadecimal Ribbon cassette specification Printing specificationPaper specifications Description Remark Environment conditions Electrical characteristicsReliability Dimensions Dimensions & weightOptional features WeightPage Appendix a Code tables 1 Katakana 2 PC850 Multilingual 3 PC860 Portuguese 4 PC863 Canadian-French 5 PC865 Nordic 16 WPC1252 Latin1 17 PC866 Russian 18 PC852 Latin2 19 PC858 Euro 21 PC862 Israel 22 PC864 Arabic 23 Thai character code 24 WPC1253 Greek 25 WPC1254 Turkish 26 WPC1257 Baltic 27 Farsi 28 WPC1251 Russian 29 PC737 Greek 30 PC775 Baltic 31 Thai character code 32 OldCode Israel 33 WPC1255 Israel 34 Thai character code 35 Thai character code International character code table RS-232C Serial I/F cable connection 2 RS-232C Serial I/F signal descriptionsRS-232C Serial I/F Pin no Source Compatibility mode Nibble mode Byte mode IEEE1284 Parallel I/F Drawer kick-out USB I/F signal descriptionsPin No Signal name Assignment Color Function Drawer kick-out cable connection KN02-00009E Rev