Samsung SRP275APG user manual ESC d, ESC e

CHAPTER 4 Control commands list

ESC c 4

[Name]	Select paper sensor(s) to stop printing
[Format]	ASCII	ESC	c	4	n
	Hex	1B	63	34	n
	Decimal	27	99	52	n
[Range]	0 ≤ n ≤ 255
[Default]	n = 0

[Description]	Selects whether to stop printing or not when the paper runs out using n as follows:
	Bit	Off/On	Hex	Decimal	Function
	0	Off	00	0	Paper near end sensor disabled.
		On	01	1	Paper near end sensor enabled.
	1	Off	00	0	Paper near end sensor disabled.
		On	02	2	Paper near end sensor enabled.
	2-7	-	-	-	Undefined

ESC c 5

[Name]	Enable/disable panel buttons
[Format]	ASCII	ESC	c	5	n
	Hex	1B	63	35	n
	Decimal	27	99	53	n
[Range]	0 ≤ n ≤ 255
[Default]	n = 0
[Description]	Enables or disables the panel buttons.

-When the LSB of n is 0, all buttons are enabled.

-When the LSB of n is 1, all buttons are disabled.

ESC d

[Name]	Print and feed n lines
[Format]	ASCII	ESC	d	n
	Hex	1B	64	n
	Decimal	27	100	n
[Range]	0 ≤ n ≤ 255
[Default]	None
[Description]	Prints the data in the print buffer and feeds n lines.

ESC e

[Name]	Print and reverse feed n lines
[Format]	ASCII	ESC	e	n
	Hex	1B	65	n
	Decimal	27	101	n
[Range]	0 ≤ n ≤ 1
[Default]	None
[Description]	Prints the data in the print buffer and feeds n lines in the reverse direction.

4-13