GS r, Bit Binary Hex Decimal Status | Samsung SRP275APG specs

CHAPTER 4 Control commands list

GS r

[Name]	Transmit status
[Format]	ASCII	GS	r	n
	Hex	1D	72	n
	Decimal	29	114	n
[Range]	n = 1, 2, 49, 50

[Description]	Transmits 1 byte of status data using n as follows:

		n					Function
	1, 49			Transmits paper sensor status
	2, 50			Transmits drawer kick-out connector status
[Notes]	• Each status is 1 byte.
	• The status to be transmitted is as follows:
	- Paper sensor status (n = 1, 49)

		Bit	Binary			Hex	Decimal	Status
		0, 1	00			00	0	Paper near end sensor: paper adequate.
		0, 1	11			03	3	Paper near end sensor: paper not present.
			11			03	3	Paper near end sensor: paper not present.
		2, 3	00			00	0	Paper end sensor: paper present.
		2, 3	11			0C	12	Paper end sensor: paper not present.
			11			0C	12	Paper end sensor: paper not present.
		4	0			00	0	Not used. Fixed to Off.
		5,6	-			-	-	Undefined.
		7	0			00	0	Not used. Fixed to Off.

•The status to be transmitted is as follows:

-Drawer kick-out connector status (n = 2, 50)

	Bit	Binary	Hex	Decimal	Status
	0	0	00	0	Drawer kick-out connector pin 3 is LOW.
	0	1	01	1	Drawer kick-out connector pin 3 is HIGH.
		1	01	1	Drawer kick-out connector pin 3 is HIGH.
	1-3	-	-	-	Undefined.
	4	0	00	0	Not used. Fixed to Off.
	5,6				Undefined
	7	0	00	0	Not used. Fixed to Off.

4-27

Image 63

Samsung SRP275APG user manual GS r, Bit Binary Hex Decimal Status

Contents

USER’S Manual Page CE Marking EMC and Safety standards Applied Safety precautions To Unplug Table of contents Appendix a Code table Appendix B Connectors Rear view Front viewPage Page Choosing a place for the printer Unpacking Connect the AC adapter according to the following procedure Connecting the cablesConnecting the AC adaptor Connecting the interface cable and drawer kick-out cable Installing the ribbon cassette Installing the paper roll Changing the paper width Installing the wall mount Option Paper OUT LED Red Color Using the operation panelControl panel Power LED Green Color Error LED Red Color Self test Error LED blinking pattern Recoverable errorsError Description Error LED blinking pattern Recovery If any of the lights are on, please check the following Printer does not start printing Printer stops printing You want to check the operation of the printer by itselfSelf test Hexadecimal dump To use the hexadecimal dump feature, follow these stepsPrinting is poor You want to check a software program DIP Switch setting for EpsonESC/POS mode Setting the DIP Switch International Character Selection DSW Code Country DIP Switch setting for CitizeniDP 3550 mode DIP Switch setting for StarSP500 mode Changing the DIP Switch setting Memory Switch Function Off Code page selection MSW Character TableOnly Font B available Serial communication Function Selectable value Customize value Function Selectable value Paper roll width Example of Memory Switch setup sheet Memory Switch Setup Mode Procedure of Memory Switch setting Memory Switch setting for Star mode SettingsFunction Class Default Settings Precautions for selecting Option Function Memory Switch BitCountry Specifications MSW 0-4 = FF Command Function Selection MSW Contextual Auto-cut Function Memory Switch Bit FunctionNear end switch Function MSW Near end switch Function CR Command Functions MSW3-1 MSW3-0 CR Ignored Character Table SettingsMSW3-9 MSW3-8 Character Table Once Explanation of term Command notation Undefined codes Undefined commandsSettings outside the defined range Exception processing Commands for SRP-275 series Commands list for Epson mode TM-U220Command Description Hex When auto line feed is disabled Command description for Epson mode TM-U220 Bit Binary Hex Decimal Status FunctionStatus Hex Hex Decimal Function Connector pinDLE DC4 fn = Bit ESC % Density Mode Number of bits Dot densitySet Maximum number of dots Mode Dot DSW1-8 on Horizontal ESC = ESC @ Font ESC J ESC a ESC cJustification ESC e ESC d ESC m ESC gESC g n ESC ESC p ESC rESC t Hex Decimal Status ESC u Paper FS pFS q GS a Function Description GS C Function GS C p L p H m fn b Real-time command type GS DGS E GS E pL pH fn d1 d2 Function Setting value b Function Type of customized value GS E p L p H fn a Function Communication condition GS E p L p H fn a d1...dk Bixolon Printer ID Specification Hex Decimal Status for ASB Decimal Function GS r DC2 Commands list for Star mode SP500 ESC L Command Description Hexadecimal Commands list for Citizen mode iDP3550/3551 Description Remark Printing specificationPaper specifications Ribbon cassette specification Electrical characteristics ReliabilityEnvironment conditions Weight Dimensions & weightOptional features DimensionsPage Appendix a Code tables 1 Katakana 2 PC850 Multilingual 3 PC860 Portuguese 4 PC863 Canadian-French 5 PC865 Nordic 16 WPC1252 Latin1 17 PC866 Russian 18 PC852 Latin2 19 PC858 Euro 21 PC862 Israel 22 PC864 Arabic 23 Thai character code 24 WPC1253 Greek 25 WPC1254 Turkish 26 WPC1257 Baltic 27 Farsi 28 WPC1251 Russian 29 PC737 Greek 30 PC775 Baltic 31 Thai character code 32 OldCode Israel 33 WPC1255 Israel 34 Thai character code 35 Thai character code International character code table 2 RS-232C Serial I/F signal descriptions RS-232C Serial I/FRS-232C Serial I/F cable connection IEEE1284 Parallel I/F Pin no Source Compatibility mode Nibble mode Byte mode Drawer kick-out cable connection USB I/F signal descriptionsPin No Signal name Assignment Color Function Drawer kick-out KN02-00009E Rev