Alpine PXA-H700 owner manual 40-EN

Installation and Connections

•PXA-H700 + DVA-7996 Head Unit + CD Changer + Navigation System + Monitor + External Amplifier

White/GreenWhite/Green

Guide Control Cable Guide Control Cable

	NTSC	RGB
NAVIGATION	VIDEO OUTPUT
INPUT
NTSC VIDEO
GUIDE OUTPUT OUTPUT RGB OUTPUT	REMOTE INPUT

	KCE-900E
	(Sold Separately)
RCA connection cable		RGB Cable

(Sold Separately)

Fiber Optic Cable (Sold Separately)

Fiber Optic Cable ★

(Sold Separately)

Ai-NET Cable

(Included with CD Changer)

Ai-NET Cable (Included)

			CENTER
(L)				SELECTABLE
				SUBWOOFER
						CD	CHG	DVD
				MIC		DIGITAL 1	DIGITAL 2	DIGITAL 3
(R)				CONTROL UNIT
FRONT 1	FRONT 2	REAR	SUBWOOFER	OUTPUT	INPUT	GUIDE	(L)	(R)	Ai–NET IN	CHANGER IN
(FULL RANGE							ANALOG 1				POWER SUPPLY
/TWEETER)									ANALOG 2	ANALOG 3

Navigation

Monitor

(TME-M790 etc.)

Remote Control

Output Cable

To

Video

Input

Remote Control Jack

Input Cable

DVA-7996	White/Brown	White/Brown
Head Unit
	Video Output Yellow	RCA
	Cable	connection
		cable

★★

Ai-NET Compatible

CD Changer

Blue/White

Remote OUT Cable

Blue/White

Remote ON Cable

Grounding Cable

Battery Power Cable

To External Amplifier Remote ON Cable

Not used in this system

Connect to a metal part of chassis body with a screw.

Battery

Center Output or Subwoofer Output (L)*
Subwoofer Output or Subwoofer Output (R)*
Rear Output (L)
Rear Output (R)		To External
Front 2	Output (L)
		Amplifier
Front 2	Output (R)
Front 1	Output (L)
Front 1	Output (R)

NOTE

Depending on the type of monitor used in the system, a separate RGB conversion cable (KWE-503N) may be required. In addition, connections are different from the ones shown above when connecting to an all-purpose monitor. Also refer to the operating instructions of the KCE-900E. For details, contact your store of purchase or an Alpine Information Center.

Please observe the following when using Fiber Optic Cable.

•Do not coil the Fiber Optic Cable smaller than a 30mm radius.

•Do not place anything on top of the Fiber Optic Cable.

*When the subwoofer is connected to the center speaker output jack, it becomes subwoofer output (L or R).

In this case, change the setting of the center speaker to subwoofer in “Setting the speakers” (page 4).

NOTES

★When connecting a Optical Digital CD

Changer

★★ When connecting a Optical
Digital CD Changer, change 1	2
the Digital/Analog switch of
the CD Changer to “2”
(Digital Output)

40-EN