Installation and Connections
IMPORTANT
Accessories
Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
To prevent external noise from entering the audio system.
• | Locate the unit and route the leads at least 10 cm away |
| from the car harness. |
• | Keep the battery power leads as far away from other |
| leads as possible. |
• | Connect the ground lead securely to a bare metal spot |
Display cable | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
Connection Cable Velcro fastener for mounting control unit or base unit
| x 3 |
Pan head screw | Flat head screw |
(M3 x 5) | (M5 x 8) |
Microphone
Flanged self- tapping screw (M4 x 14)
x 4
Flush mount
(remove any paint, dirt or grease if necessary) of the |
car chassis. |
• If you add an optional noise suppressor, connect it as |
far away from the unit as possible. |
Your Alpine dealer carries various noise suppressors. |
Contact them for further information. |
• Your Alpine dealer knows best about noise prevention |
measures so consult your dealer for further |
information. |
x 2 | x 4 | x 2 |
Mounting unit |
| |
(M2.6 x 8) |
|
|
x 4 | 1 set |
