Alpine owner manual PXA-H701 + Head Unit + Video Deck etc. + External Amplifier, 39-EN

•PXA-H701 + Head Unit + Video Deck etc. + External Amplifier

•For connecting a head unit with which Ai-NET connections are not possible.

Blue/White	Blue/White
Remote ON Cable	* Remote OUT cable
		RCA connection cable
Ai-RCA Conversion Cable		RCA connection cable
(Sold Separately)

			CENTER
(L)				SELECTABLE
				SUBWOOFER
						CD/DVD H.U.	CHG	DVD
				MIC		DIGITAL 1	DIGITAL 2	DIGITAL 3
(R)				CONTROL UNIT
FRONT 1	FRONT 2	REAR	SUBWOOFER	OUTPUT	INPUT	GUIDE	(L)	(R)	Ai–NET IN	CHANGER IN
(FULL RANGE							ANALOG 1				POWER SUPPLY
/TWEETER)									ANALOG 2	ANALOG 3

Head Unit

TV Tuner,

Video etc.

Audio

Output

Blue/White

Remote OUT Cable

White/green

Guide Control Cable

Grounding Cable

Battery Power Cable

Center Output or Subwoofer Output (L)* Subwoofer Output or Subwoofer Output (R)* Rear Output (L)

Rear Output (R) Front 2 Output (L) Front 2 Output (R) Front 1 Output (L) Front 1 Output (R)

To External Amplifier Remote ON Cable

Not used in this system

Connect to a metal part of chassis body with a screw.

To External Amplifier

Battery

*When the subwoofer is connected to the center speaker output jack, it becomes subwoofer output (L or R).

In this case, change the setting of the center speaker to subwoofer in “Setting the speakers” (page 4).

NOTE

When using the PXA-H701 with a non-Ai-NET head unit, +12V is required on this line * to turn on the equalizer. If your head unit does not have a remote-on or power-antenna turn-on wire, an SPST switch must be connected between an ignition source and this terminal. The PXA-H701 can then be turned on using this switch.

The PXA-H701 can be used with any head unit. However, only an Alpine Ai-NET compatible head unit will be able to take full advantage of all the features and functions of this processor.

39-EN