![ALTEC LANSING AHP612 WIRELESS STEREO HEADPHONES](/images/new-backgrounds/9651/96515x1.webp)
ALTEC LANSING AHP612 WIRELESS STEREO HEADPHONES
Box Contents
•Wireless stereo headphones
•Transmitter/charging base
•RCA cable
•3.5 mm
•3 AAA NiMH rechargeable batteries
•AC power adapter
•User’s manual and quick connect card
Introduction
The AHP612 headphones expand and enhance your enjoyment of music or TV sound. Like FM radio, the 900MHz signal travels with ease through walls, floors, ceilings and other obstacles, delivering high quality stereo sound to virtually anywhere inside the house or out.
Delivering drift- and
The AHP612 headphones are compatible with most audio sources, such as TVs, DVD players, VCRs, A/V receivers/amps, stereos, computers, and portable devices (CD players, cassette players, MP3s etc.).
Location of Functions
(A)
(B) Battery compartment cover
Transmitter Back View:
(K) Channel select switch
(L) Input level control
(M) RCA audio input jacks
(N) Transmitter power input jack
Accessories:
(O) Transmitter AC power adapter
(P) RCA cable
(Q) 3.5mm Y adapter cable |
(R) 3 NiMH AAA batteries
Connecting the Headphone System
Powering the Transmitter
Connect the small, round plug from the transmitter AC power adapter
(O)to the transmitter power input jack (N) and plug the other end of the transmitter AC power adapter (O) into any standard 120V AC wall outlet.
CHANNEL LEVEL
|
|
|
|
1 2 3 |
|
| L INPUT R |
DC 12V
Headphones (left ear cup)
(C) On/off/scan button
(D) LINK indicator light
(E) Charging contacts
ON/OFF
SCAN
LINK
Headphones (right ear cup)
(F) MUTE button
(G) MUTE indicator light
(H) Volume control
+
–
Transmitter Front View:
(I) Charge indicator light
(J) Audio level indicator light
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you do not intend to use the AHP612 headphones for an extended period of time, you may wish to unplug the transmitter AC power adapter.
Connecting to an AV receiver or television
•Locate the included red and white RCA cable (P).
•Connect one end of the RCA cable (P) to the matching red and white RCA audio input jacks (M) located on the back of the transmitter, and the other end to the back of your AV receiver.
Connecting to a computer:
•Locate the included red and white RCA cable (P) and 3.5mm
•Connect the
•Connect one end of the RCA cable (P) to the matching red and white RCA jacks on the
Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the transmitter.
1