Altech Auto Security AL7024S manual Information Commands

AL7024S Quick Start Manual

3.4Information Commands

Command	AT Manual pages	Function
AT&V	Display configuration,	Display the modem configuration.
		(Actual configuration, profile 0, profile 1)
	p.291
		Used to see various types of information
ATI	Request identification	ATI3: Product title
	information, p.51	ATI5: Software architecture
		ATI7: product description
AT+CGMR	Request revision	Display firmware revision number
	identification, p.47
AT+CGMM	Request model	Display supported frequency bands
	identification, p.46
AT+CGSN	Request IMEI-Nr. p.47	Display serial-number (IMEI-Nr.)
AT+GCAP	Capabilities list, p.200	Get the list of capabilities
		Set the modem to a Class or return current
	GPRS mobile station	class
AT+CGCLASS		AT+CGCLASS? : returns current GPRS class
	class, p.297	AT+CGCLASS=”CG”:set modem to GPRS only
		mode
	DCE response format,	Result codes as words or as numbers
ATV		ATV0: numbers
	p.257	ATV1: words (default)
		Select, if “ERROR” or Error with error-number
		is displayed
AT+CMEE	Report Mobile	AT+CMEE=0: disable Error reports (“ERROR”
		displayed)
	Equipment errors, p.274
		AT+CMEE=1: enable Error reports (Error-
		number displayed)
AT+CEER	Extended Error Report,	This command gives the reason of failure of the
		last call-setup or answering-attempt.
	p. 279
		Reports detailed type of data connection, if
AT+CR	Service reporting	enabled.
		AT+CR=0: extended reports disabled
	control, p.110
		AT+CR=1: extended reports enabled
		Gives more detailed ring information for
	Cellular result codes,	incoming call.
AT+CRC		E.g. “+CRING:VOICE”
	p.67	AT+CRC=0: disable extended reports
		AT+CRC=1: enable extended reports

No. AL7020S-QSM-101 Altec Electronic AG Seite 11 / 18