MATRIX SWITCHERS
PRECAUTIONS/SAFETY WARNINGS | 1 |
Please read this manual carefully before using your HOMERUN Series Matrix Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your HOMERUN Series Matrix Switcher and to prevent fire and shock hazard. Please read them carefully and heed all warnings.
1.1 GENERAL
∙Unauthorized personnel shall not open the unit since there are
∙Qualified Altinex service personnel, or their authorized representatives must perform all service.
1.2 INSTALLATION
∙For best results, place the HOMERUN Series Switchers on a flat, level surface in a dry area, away from dust and moisture. To prevent fire or shock, do not expose this unit to rain or moisture.
∙Handle your HOMERUN Switcher carefully. Dropping or jarring can damage the internal components. Do not place heavy objects on top of the HOMERUN Switcher.
∙Do not place the HOMERUN Switcher in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components. Do not pull the power cord or any signal cables that are attached to the HOMERUN. If the HOMERUN is not used for an extended period of time, disconnect the power cord from the power outlet.
1.3 RACK-MOUNT INSTALLATION
∙Use only Altinex supplied
∙The maximum operating ambient temperature is 45 degrees Centigrade.
∙When installing the HOMERUN Series Switcher into a rack, distribute individual units evenly, otherwise hazardous conditions may be created by an uneven weight distribution. Allow
∙Connect the HOMERUN Series Switcher to a properly rated power outlet.
∙Reliable grounding of the HOMERUN Series Switcher should be maintained by using the provided
1.4 CLEANING
∙Unplug the HOMERUN Series Switcher’s power cord before cleaning.
∙Clean surfaces with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.
1.5 FCC NOTICE
∙This device complies with the part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.
∙Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment.
∙This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference in which case the user will be required to correct the interference at his own expense.
2
