Altinex 400-0026-004 manual Recall, Space, Delete, Clear, Enter, Windows Based Control Software

MATRIX SWITCHERS

	to be saved in any of the 16
	available memories.
RECALL	Allows recalling the saved
	connections from memory
	01 through 16.
SPACE	Reserved for future use.
DELETE	Reserved for future use.
CLEAR	Reserved for future use.
Recall 01,02,03	Allows the end user to recall
	the first three settings by
	pressing just one button.
ENTER	To complete and execute a
	command.

C. Making Connections:

Making connections with the CP-02remote terminal is really quite simple.

1.Press the CONNECT key. IN? will appear on LCD display.

IN:?

2.Enter a two digit INPUT number. For example: to connect input 5, enter: 05 IN: 05 OUT? will appear on the display.

IN:05 OUT?

3.Enter a two-digit OUTPUT number. For example: to connect output 11, enter 11 OUT: 11 will appear on the screen.

IN:05 OUT:11

4.Press the CONNECT key again to enter the next connection.

5.Continue this process until all connections are made.

D.Saving Your Settings:

The CP-02remote terminal has 16 memories that can store preset configurations. To save your settings use the SAVE key.

1.Press the SAVE key. SAVE? will appear on the LCD display.

SAVE?

2.Type in a two-digit memory number in which the setting is to be stored. Memories available are 01 through 16.

SAVE? 05

E. Recalling Your Settings:

There are two ways to recall your settings: Quick Recall and Standard Recall. Quick Recall is available for the first three stored configurations. The recall is accomplished by simply pressing the Recall 01, Recall 02 or Recall 03 keys.

1.Press Recall 01 to recall setting stored in memory 01

2.Press Recall 02 to recall setting stored in memory 02

3.Press Recall 03 to recall setting stored in memory 03

Standard Recall is accomplished by pressing the RECALL key and entering a memory number in which a particular setting was stored.

1.Press the RECALL key. RECALL? will appear on LCD display

RECALL?

2.Enter a two-digit memory number from which the setting is to be recalled.

RECALL? 05

3.Press the ENTER key.

Note that when the recall function is used, because the settings can include multiple connections, the LED’s on the back of the HOMERUN will not reflect the connections recalled by the memory, but rather the last connection made.

7.5 WINDOWS BASED CONTROL SOFTWARE

This software is available from Altinex website at www.altinex.com, in the Download section.

20