Altinex MT105-111, 400-0226-003, MT105-110 manual Error Codes

MULTI-TASKER

Example:

If one MT105-110/111card is in slot #2 of unit 3:

When sending command [VERC2U3], the Multi- Tasker™ Enclosure will return feedback as MT105-111 690-0126-011.

2. [C]

This command displays the status of the card and connections of the Matrix Switcher.

Command Format: [CnUi]

Cn = card ID (n = a slot # from 1 to 19)

(1 to 8 for MT100-101 or 1 to 4 for MT100-106)

Ui = unit id (i = 0 to 9) (refer to the MT100-100 user’s guide for explanation)

Example:

If one MT105-110/111card is in slot #2 of unit 3 with output 1, 2 and 3 ON:

When sending command [C2U3], feedback will be returned as:

Config:16X8

In1 Out1 ON

In2 Out2 ON

In1 Out3 ON

In2 Out4 OFF

In8 Out5 OFF

In7 Out6 OFF

In10 Out7 OFF

In16 Out8 OFF

Description of Feedback:

Input1 is connected to Output1 and Output1 is enabled

Input2 is connected to Output2 and Output2 is enabled

Input1 is connected to Output3 and Output3 is enabled

Input2 is connected to Output4 and Output4 is disabled

Input8 is connected to Output5 and Output5 is disabled

Input7 is connected to Output6 and Output6 is disabled

Input10 is connected to Output7 and Output7 is disabled

Input16 is connected to Output8 and Output8 is disabled

Note: If there is no card in slot #2 of unit 3,sending the [C2U3] command will not return any feedback.

ERROR CODES

ER01: CPU Error

This type of error indicates that the CPU is not working properly.

ER02: I²C Communication Error

This means that the communication between the MT105-110/(111) card and its serial device has failed.

ER03: RS485 Communication Error

This type of error is a communication error between the MT105-110/(111)card and the controller of the Multi-Tasker™ Enclosure.

[CiS]

This command saves card status such as ON/OFF, IN/OUT connection as default settings

3. [IO]

This command will connect input x with output y, but the user needs to use the [ON] command to enable this output.

Command Format: [IxOyCnUi]

9

9