Altinex SW1956CT manual Precautions / Safety Warnings, General, Installation, Cleaning, Fcc Notice

Models: SW1956CT

1 11
Download 11 pages 39.11 Kb
Page 3
Image 3
PRECAUTIONS / SAFETY WARNINGS

SWITCHER

PRECAUTIONS / SAFETY WARNINGS

1

Please read this manual carefully before using your SW1956CT Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your SW1956CT and to prevent fire and shock hazards. Please read them carefully and heed all warnings.

1.1 GENERAL

Qualified ALTINEX service personnel or their authorized representatives must perform all service.

1.3 INSTALLATION

For best results, place the SW1956CT on a flat, level surface. Keep in a dry area away from dust and moisture.

To prevent fire or shock, do not expose this unit to water or moisture. Do not place the SW1956CT in direct sunlight, near heaters or heat-radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.

Handle the SW1956CT carefully. Dropping or jarring can damage internal components.

Do not place heavy objects on top of the SW1956CT. If the unit is to be mounted to a table or wall, use only ALTINEX-made mounting accessories.

To turn off the main power, be sure to remove the cord from the power outlet. The power outlet socket should be installed as close to the equipment as possible, and should be easily accessible.

Do not pull the power cord or any cable that is attached to the SW1956CT Switcher.

If the SW1956CT is not to be used for an extended period, disconnect the power cord from the outlet.

1.4 CLEANING

Unplug the SW1956CT power cord before cleaning. Clean surfaces with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.

1.5 FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions found herein, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

400-0378-004

2

Page 3
Image 3
Altinex SW1956CT manual Precautions / Safety Warnings, General, Installation, Cleaning, Fcc Notice, Switcher