SWITCHER
APPLICATION DIAGRAMS | 5 |
DIAGRAM 1: TYPICAL SETUP
ALTINEX includes a remote control switch with the SW1956CT. The remote switch has a 6 ft cable and may used to control the switcher manually.
When the remote control switch is connected to the INPUT SELECT jack, INPUT 1 will be selected if the channel select contact is closed. INPUT 2 will be selected if the channel select contact is open.
The switching will be identical whether there are one or two active signals. The LEDs located next to the input ports indicate which input is selected.
DA1930CT
DA1930CT
SW1956CT
DA1931CT |
6 |
