care and cleaning

EQUIPMENT CARE

Under normal circumstances, this oven should provide you with long and trouble free service. There is no preventative maintenance required, however, the following Equipment Care Guide will

maximize the potential life and trouble free operation of this oven.

The cleanliness and appearance of this equipment will contribute considerably to operating efficiency and savory, appetizing food. Good equipment that is kept clean works better and

lasts longer.

CLEAN DAILY

1.Disconnect unit from power

source and let cool.

2. Remove all detachable items such as wire shelves, side racks, and drip pans. Clean these items separately.

3.Wipe the interior metal surfaces of the oven with a paper towel to remove loose food debris.

4.Clean the interior metal surfaces of the cabinet with a damp clean cloth or sponge and any good commercial detergent.

NOTE: Avoid the use of abrasive cleaning compounds, chloride based cleaners, or cleaners containing quaternary salts. Never use hydrochloric acid (muriatic acid) on stainless steel.

5.Spray heavily soiled areas with a water soluble degreaser and let stand for 10 minutes, then remove soil with a plastic scouring pad.

6.Wipe control panel, door vents, door handles, and door gaskets thoroughly since these areas harbor food debris.

7.Rinse surfaces by wiping with sponge and clean, warm water.

DANgEr

ENSURE POWER SOURCE

MATCHES VOLTAGE STAMPED

ON APPLIANCE NAMEPLATE.

8.Remove excess water with sponge and wipe dry with a clean cloth or air dry. Leave doors open until interior is completely dry. Replace side racks and shelves.

9.Wipe door gaskets and control panel dry with a clean, soft cloth.

10.Interior can be wiped with a sanitizing solution after cleaning and rinsing. This solution must be approved for use on stainless steel food contact surfaces.

11.To help maintain the protective film coating on polished stainless steel, clean the exterior of the cabinet with a cleaner recommended for stainless steel surfaces. Spray the cleaning agent on a clean cloth and wipe with the grain of the stainless steel.

12.Clean any glass with a window cleaner.

Always follow appropriate state or local health (hygiene) regulations regarding all applicable cleaning and sanitation requirements for equipment.

CLEAN THE DOOR VENTS

Door vents need to be inspected and cleaned as required.

CHECK OVERALL CONDITION OF

OVEN ONCE A MONTH

Check the oven once a month for physical damage and loose screws. Correct any problems before they begin to interfere with the operation of the oven.

D A N g E r

AT NO TIME SHOULD THE INTERIOR

OR EXTERIOR BE STEAM CLEANED,

HOSED DOWN, OR FLOODED WITH

WATER OR LIQUID SOLUTION OF

ANY KIND. DO NOT USE WATER JET

TO CLEAN.

SEVErE DAMAgE Or

ELEcTrIcAL hAZArD

cOULD rESULT.

WARRANTY BECOMES VOID IF

APPLIANCE IS FLOODED

DO NOT USE OVEN IF CONTROLS ARE NOT PROPERLY FUNCTIONING

Refer to the Trouble Shooting Guide located in this manual or call an authorized service technician.

simple control smokers installation/operation/service manual - pg. 16

Page 18
Image 18
Alto-Shaam 1767-SK, 1000-SK-I, 1000-SK/II manual Clean the Door Vents

1000-SK/II, 1000-SK-I, 1767-SK specifications

Alto-Shaam has established itself as a leader in the foodservice equipment industry, particularly known for its innovative cooking and holding technologies. Among its premier offerings are the Alto-Shaam 767-SK, 1767-SK, 1000-SK-I, and 1000-SK/II models, each designed to meet the diverse needs of commercial kitchens while promoting efficiency, quality, and simplicity.

The Alto-Shaam 767-SK stands out with its ability to provide consistent heated holding for various foods. Featuring Signature Cook & Hold technology, this unit can hold food at precise temperatures, which helps to enhance flavors and maintain quality. With a temperature range of 140°F to 200°F, it is ideal for items such as roasted meats and baked goods. Its design also allows for easy cleaning and maintenance, ensuring long-term reliability in busy kitchen environments.

The 1767-SK model is a versatile holding cabinet that places an emphasis on space efficiency without compromising capacity. With a compact footprint, it accommodates a variety of food items while maintaining optimal temperature control. This model employs a patented Halo Heat technology, designed to provide even heat distribution, preventing moisture loss and preserving food texture and taste.

The Alto-Shaam 1000-SK-I and 1000-SK/II further enhance the brand's reputation for quality with advanced features tailored for high-demand settings. Both models integrate Smart Control technology, allowing operators to program and monitor cooking parameters digitally. This capability ensures consistent results and reduces variations in food quality, which is critical for establishments focused on delivering an exceptional dining experience.

A notable common feature across these models is their energy efficiency. Utilizing innovative thermal technology, these units require less power compared to traditional options, making them environmentally friendly and cost-effective for any foodservice operation. Additionally, all models come equipped with durable stainless steel construction, ensuring long-lasting performance even in the most demanding kitchen environments.

In summary, the Alto-Shaam 767-SK, 1767-SK, 1000-SK-I, and 1000-SK/II represent a blend of advanced technology, efficient design, and consistent performance. Whether in a restaurant, catering operation, or institutional kitchen, these units cater to the specific needs of operators and chefs, ensuring that every dish served is of the highest possible quality. By investing in these innovative solutions, establishments can effectively improve their service and maintain customer satisfaction.