5.Remove refrigerator door by lifting off bottom hinge.
6.Remove center hinge bracket and shim using Phillips screwdriver.
7.Remove toe grille and bottom hinge cover. Both snap off.
8.Remove bottom hinge and shim using hex nut driver.
5/16" screws | Door |
| |
closure | Center hinge | ||
| |||
| Phillips | pin | |
| Center | ||
| screws | ||
Top |
| hinge | |
hinge |
|
| |
| Bottom |
| |
| hinge |
|
3/8" screws
9.Reverse doors by performing the following steps:
•Replace bottom hinge and shim on opposite side of cabinet.
•Remove screws from center mullion. Place screws in holes left when center hinge bracket was removed. Rotate center hinge bracket 180° and install center hinge bracket on opposite side of cabinet with hinge screws. Reuse plastic hinge pin washers.
•Place refrigerator door on bottom hinge. Install center hinge pin in center hinge bracket. Place door closure on center hinge pin.
•Remove plugs from top of refrigerator cabinet. Replace plugs in holes left when top hinge was removed. Remove hinge hole cover from freezer door. Replace on opposite side of freezer door.
•Place freezer door on center hinge and door closure. Install top hinge and shims on opposite side of cabinet using hex nut driver. Snap hinge cover in place on hinge.
•Use a penny at top to space door 3/4" (19 mm) from cabinet. Make sure handle side of door is 1/8" (3 mm) higher than hinge side of door before tightening top hinge screws.
1/8" (3 mm)
3/4" (19 mm)
10.Remove plugs from side of refrigerator and freezer doors using a putty knife with the blade covered in masking tape.
Install button
plugs hereRemove button plugs
11.Mount freezer handle on opposite side of refrigerator door using mounting screws previously removed. Snap end cap(s) into place.
12.Mount refrigerator handle on opposite side of freezer door using mounting screws previously removed. Snap end cap(s) into place.
13.Replace plugs in empty side mounting holes on refrigerator doors.
14.Proceed to Leveling Refrigerator procedures for final placement of refrigerator.
Connect Ice Maker Water Supply Line
!CAUTION
To avoid property damage, protect soft vinyl or other flooring with cardboard, rugs, or other protective materials when moving refrigerator. Make sure stabilizing leg is raised before moving refrigerator. Raise stabilizing leg by turning counterclockwise.
4
