Controls | Refrigerator Features |
This refrigerator operates most efficiently at household temperatures of
Refrigerator and Freezer Controls
Refrigerator and freezer controls are located on center divider between refrigerator and freezer sections.
When freezer control is set to OFF, neither refrigerator nor freezer sections will cool. Initially, set both controls to 4. Wait 24 hours for refrigerator and freezer sections to reach desired temperatures. After 24 hours, adjust controls, one number at a time, as desired. 1 is warmest setting and 7 is coldest.
Exterior Moisture Control
Exterior Moisture Control is located on center divider between refrigerator and freezer sections.
In humid conditions, refrigerators form condensation around doors. Special heaters in refrigerator cabinet minimize condensation.
Humidity depends on location of refrigerator. Set control to ON if refrigerator is in a humid area or whenever moisture is evident around doors. Set control to OFF if refrigerator is in a less humid area. Setting can be adjusted as conditions change.
High quality steel is used in this refrigerator. However, constant exposure to moisture may cause refrigerator cabinet to rust. Set control to ON anytime condensation forms on refrigerator cabinet.
Setting Controls
Set controls precisely with a household thermometer that includes temperatures between
Put thermometer snugly between frozen packages in freezer section. Wait
Put thermometer in a glass of water in middle of refrigerator section. Wait
!CAUTION
To avoid property damage, confirm shelf is secure before placing items on shelf.
Refrigerator Shelves
Models feature either glass or wire shelves. Shelves adjust to meet individual storage needs.
!CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.
•Remove shelves by lifting front, releasing hooks from metal track then pulling out.
•Replace shelves by inserting hooks into metal track and lowering front.
Metal tracks
Chiller Fresh™ System
Chiller Fresh™ system features a drawer inside a sleeve. Air circulates between drawer and sleeve. This systems keeps food fresh longer and up to 3°C (5°F) colder than refrigerator temperature.
Chiller Fresh™ control is located below front shelf trim. Control adjusts amount of air circulating around drawer. Slide control to cold for normal refrigerator temperature and to coldest for colder temperature. Ice crystals may form on drawer or food on coldest setting. Cold air can decrease refrigerator temperature. Refrigerator control may need to be adjusted.
Chiller Fresh
climate control | coldest | cold | temperature |
•Remove drawer by lifting and pulling out. Remove shelf by lifting front, releasing hooks from metal track then pulling out.
•Replace shelf by inserting hooks into metal track and lowering front. Use slots 1 through 3 only. Replace drawer by sliding in.
7
