Amana DCF4205, ACF4205A Using the Oven Control, Setting Electronic Clock, Setting Minute Timer

Using the Oven Control

ee io

Flashing Display

When power is connected

or interrupted, oven display flashes. Press CLOCK to reset display. Clock may need to be reset.

Making the Numbers

Increase at a Faster Rate

Time increases in largerincrements

the longer the • or • pad is held.

Digital Oven Control	I
	OVEN
Q	CLEAN OFF	WM
	a
	BROIL
Q
I PREHEAT I= LOCKED

PUSH TO TURN

Setting Electronic Clock

The 12 hour clock does not displayAM,PMor militarytime. When power is connected or restored, displayflashes until

RECALL OVEN TEMP/CLOCK pad is pressed or,,=, temperature knob is turned.

1.Press RECALL OVEN TEMP/CLOCK pad.

2.Press • or • pads until correct time-of-day displays.

3.Time is locked in after 5 seconds of no adjustment.

Timer Signal

When time elapses, beep will sound. Press TIMER ON/OFF pad to stop timer and return to clock display.

Setting Minute Timer

The timer is a timer only. Electronic timer does not control bake, broilor self-clean function. Timer can be set up to 11 hours and 59 minutes.

1.PressTIMER ON/OFF pad.

2.Press • or • pad until desired amount of time displays.

•Time increases in 1 minute and 10 minute increments.

•Timer beginscounting downautomaticallyim after time is entered.

•To view clockwhile timer counts down, press RECALL OVEN TEMP/CLOCK pad. "timerwill return after 3 secondsof no input.

3.Press and hold TIMER ON/OFF pad to cancel timer signal.

•After time elapses, timer beeps a single,three second tone.

Resetting and Canceling Timer

To reset the time when remainingtime is displayed, press TIMER ON/OFF pad, then • or • pad until new time displays. To cancel timer when remaining time is displayedor when signal is beeping, press and hold TIMER ON/OFF pad.

12