Option B, No waste disposer – no air gap
No waste disposer – no air gap
| ||
| drain clamphose clamp | |
| Waste tee | |
| Drain hose | |
| Drain trap | |
1 Black end | 1. Connect black end of of drain hose to waste | |
tee and cut if needed. | ||
| NOTE: Do not cut ribbed section. | |
2 | 2. Attach black end of drain hose to waste tee | |
with a large silver drain hose clamp (provided). | ||
Use pliers to squeeze clamp open and move | ||
| ||
| into position. If the drain hose was cut use a | |
| 1¹⁄₂” to 2” (3.8 to 5 cm) | |
| provided). |
Option C, Waste disposer – with air gap
Option D, No waste disposer – with air gap
No waste disposer – with air gap
Air gap
Large silver drain | |
| hose clamp |
| (provided) |
Waste tee | Rubber hose |
| connector |
| Drain hose |
| Drain trap |
1 Black end | 1. Connect black end of drain hose to air gap |
and cut if needed. |
NOTE: Do not cut ribbed section.
2. Attach drain hose to air gap with large silver
2 | drain hose clamp (provided). |
| |
| 3. Use pliers to squeeze clamp open and move |
| into position. If the drain hose was cut, use a |
| 1¹⁄₂” to 2” (3.8 to 5 cm) |
3 | (not provided). |
| |
| 4. Use a rubber hose (not provided) with |
Waste disposer – with air gap
Disposer inlet
Air gap
Large silver drain hose clampl (provided)
Rubber hose connector
Drain hose
connect from waste tee to air gap. |
Drain trap
1
2
3Black end
4
5
1.Using a hammer and screwdriver, knock plug into disposer.
2.Use needle nose pliers to remove plug.
3.Connect black end of drain hose to air gap and cut if needed.
NOTE: Do not cut ribbed section.
4.Attach drain hose to air gap with large silver drain hose clamp (provided). Use pliers to squeeze clamp open and move into position. If the drain hose was cut, use a 1¹⁄₂” to 2” (3.8 to 5 cm)
5.Use a rubber hose (not provided) with
9
