Amana W10261420A Make Power Supply Cord Connection, Remove terminal box cover

6 Remove terminal box cover

Using a ¹⁄₄” hex-head socket, nut driver or Phillips screwdriver, remove terminal box cover. Retain for later use.

7 Install strain relief

Install a UL Listed/CSA Approved strain relief. Check that the screwheads are facing to the left when tightening conduit nut. Strain relief may be provided with the power supply cord kit.

What type of electrical connection will you use?

Power Supply Cord:

Follow Option A instructions

Direct Wire:

Follow Option B instructions

Make Power Supply Cord Connection

Option A, Power Supply Cord:

1 Power Cord—Route cord into terminal box

Route cord so that it does not touch dishwasher motor to lower part of dishwasher tub. Pull cord through strain relief in terminal bow.

Select UL Listed/CSA Approved twist-on wire connectors (not included) rated to connect your household wiring to 16-gauge dishwasher wiring.

WARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground connector in terminal box.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2 Power Supply Cord— Connect ground wire

	Ground
	wire
Ground	Washer
wire
	Ground
	connector

Remove the green grounding screw and place

through the ring terminal of the green ground wire. Reattach and tighten the green screw.

11