Removing the Wireless LAN Module
1.Turn off the computer, and turn it over, remove the battery (page 2 - 5) and remove the keyboard (page 2 - 12).
2.Remove screws 1 - 5 from the keyboard shielding.
3.Remove the keyboard shielding 6 , the Wireless LAN Module will be visible at point 7 .
4.Carefully disconnect cables 8 & 9 then gently pull the two release latches 10 - 11 on the sides of the module socket.
5.The Wireless LAN Module 12 (Figure c) will
a. |
| c. |
|
1 | 2 |
|
|
| 3 |
|
|
| 5 |
| 8 |
| 4 | 10 | |
|
| ||
b. |
| 11 | 9 |
7 |
|
| |
|
|
|
d.
12
6
Disassembly
Figure 9
Wireless LAN
Module Removal
a. Remove the screws.
b. Remove the keyboard shielding.
c. Disconnect the cables and pull the release latches.
d. Remove the WLAN module.
Note: Make sure you reconnect the antenna cables to the “Main” and “BT” socket (Fig- ure c).
6.Keyboard Shielding
12.Wireless LAN Module
• 5 Screws
2.Disassembly
Removing the Wireless LAN Module 2 - 13
