AMD GA-M51GM-S2G user manual SATA-II Primary RAID Disabled SATA-II 2 Secondary RAID

English

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software

Integrated Peripherals

IDE Configuration		[Press Enter]			Item Help
USB Configuration		[Press Enter]			Menu Level
SATA-II Configuration		[Press Enter]
Onboard Audio Function		[Auto]
Onboard LAN Function		[Auto]
Onboard LAN Boot ROM		[Disabled]
Onboard 1394 Function		[Enabled]
Onboard Serial Port 1		[3F8/IRQ4]
Onboard Serial Port 2		[2F8/IRQ3]
Onboard Parallel Port		[378/IRQ7]
Parallel Port Mode		[SPP]
: Move	Enter: Select	+/-/PU/PD: Value	F10: Save		ESC: Exit	F1: General Help
	F5: Previous Values			F7: Optimized Defaults

Figure 1

In the SATA-II Configuration submenu, enable SATA-II RAID function. Then enable the SATA ports with hard disks that you want to use for RAID. In the example in Figure 2, enable SATA-II 1 Primary/ Secondary RAID or SATA-II 2 Primary/Secondary RAID). (For example, if you wish to create RAID with hard disks on the SATAII0 and SATAII1 connectors, set SATAII 1 Primary/Secondary RAID to Enabled).

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software

SATA-II Configuration

SATA-II RAID function		[Disabled]		Item Help
SATA-II 1 Controller		[Enabled]		Menu Level
x SATA-II 1 Primary RAID		Disabled
x SATA-II 1 Secondary RAID		Disabled
SATA-II 2 Controller		[Enabled]
x SATA-II 2	Primary RAID	Disabled
x SATA-II 2 Secondary RAID		Disabled
: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Figure 2

The BIOS Setup menus described in this section may not show the exact settings for your motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version.

GA-M51GM-S2G Motherboard - 66 -