Introduction
1.1 Copyright Notice
All Rights Reserved. The information in this document is subject to change without prior notice in order to improve the reliability, design and function. It does not represent a commitment on the part of the manufacturer. Under no circumstances will the manufacturer be liable for any direct, indirect, special, incidental, or consequential damages arising from the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.
1.2 About this User's Manual
This User's Manual is intended for experienced users and integrators with hardware knowledge of personal computers. If you are not sure about any description in this User's Manual, please consult your vendor before further handling.
1.3 Warning
Single Board Computers and their components contain very delicate Integrated Circuits (IC). To protect the Single Board Computer and its components against damage from static electricity, you should always follow the following precautions when handling it :
1 
Disconnect your Single Board Computer from the power source when you want to work on the inside
2 
Hold the board by the edges and try not to touch the IC chips, leads or circuitry
3 
Use a grounded wrist strap when handling computer components.
4 
Place components on a grounded antistatic pad or on the bag that came with the Single Board Computer, whenever components are separated from the system
- 2 -
