DX4™ | Unpacking |
Every DX4™ has been thoroughly tested and has been shipped in perfect operating condition. Care- fully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your mixer for any damage that may have occurred during shipping and be sure all accessories necessary to operate the unit have arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions, please do not return the mixer to your dealer without contacting customer support fi rst.
DX4™ | Introduction |
Introduction:
Congratulations and thank you for purchasing the American Audio® DX4™ professional audio pre- amp/mixer. This mixer is a representation of American Audio’s continuing commitment to produce the best and highest quality audio products possible at an affordable price. The DX4 mixer is a four channel mixer and includes and assignable crossfader, a four band EQ, two mic inputs and other fea- tures normally only included in expensive mixers. Please read and understand this manual completely before attempting to operate your new mixer. This booklet contains important information concerning the proper and safe operation of your new mixer.
Customer Support:
American Audio® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your initial set up or operation of this unit. You may also visit us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:30 p.m. Pacifi c Standard Time.
Voice: (800)
Fax: (323)
Caution! There are no user serviceable parts inside this mixer. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your mixer may require service, please contact American Audio® customer support.
Please do not discard the packing carton in the trash. Please recycle when ever possible.
DX4™ |
Please be sure to make all connections before you plug the mixer in. Be sure the power switch is in the “OFF” position before connecting other devices to the mixer. All fader and volume controls should be set to 0 or minimum position, before the device is switched on. If the device has been exposed to drastic temperature fl uctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature.
Operating Determinations:
•When installing this mixer, please make sure that the device is not exposed to extreme heat, moisture or dust!
•There should not be any cables lying around. Doing so endangers you as well as others.
•Do not operate the mixer in extremely hot (more than 30° / 100°F) or extremely cold (less than 5°C/40°F) surroundings.
•Keep the unit out of direct sunlight and away from heaters.
•Operate the mixer only after becoming familiar with its functions. Do not permit operation by per- sons not qualifi ed for operating the mixer. Most damages are the result of unprofessional opera- tion!
©American Audio® - www.americandj.com - DX4™ Instruction Manual Page 2
