TRANS EFFECT: The Trans effect simulates a
Figure 48
PAN EFFECT: The Pan effect allows you to pan the output from the left channel to the right channel. The PT will adjust the amount of time the pan effect is in each channel (left and right). The PR will adjust the the time it takes to switch from the left channel to the right channel.
Figure 49
Parameters:
All the effects have adjustable parameters. The parameters change the way the effects will react. To adjust the parameter values for any of the effects, turn either of the two parameter Knobs (25 or 31). When the parameter value is adjusted the VFD display will indicate the parameter adjustment. All effects have two adjustable parameters.
Parameter Time (31) and parameter Ratio (25). Use these knobs
to customize the effects to your liking. For quick adjustment press and turn either of the knobs. You can also adjust the parameters using the jog wheel. Make sure the JOG WHEEL (9) is in NORMAL mode, and then press and hold the knob of the paremeter you wish to adjust and turn the jog wheel to make your adjustment.
Figure 50
HOLD BUTTON: Use the HOLD BUTTON (26) to lock your parameters. If the hold button is not activated any changes to your parameters will be momentary. To activate the hold function press the HOLD BUTTON (26) as in figure 51. When the hold function becomes activated, the hold button will begin to glow blue.
Figure 51
©American Audio® - www.AmericanAudio.us - Radius 3000™ Instruction Manual Page 33
