1.2.2 Integrated Receiver Decoder (IRD)

The IRD (purchased separately) receives satellite signals from the

antenna unit for signal processing and channel selection, and

sends the signals to the TV set for viewing. The IRD also

provides the interface for the user to activate authorization for

reception. Please refer to the User’s Manual provided with your

selected IRD for complete operating instructions.

1.3 Materials Provided withTracVision C3

Table 1-3 lists the units, cables, and materials packed in the

TracVision C3 package by name and KVH part number.

Component KVH Part No.
Antenna Unit (comprising): 01-0225-20
01-0225-23††
01-0225-26†††
01-0225-29††††
Baseplate Assembly 02-1245-01*
02-1245-03**
Radome Assembly 02-953-04
RF Cable (45 ft/14 m) 32-0417-45
Data/Power Cable (45 ft/14 m) 32-0730-45
PC Cable (6 ft/1.8 m) 32-0628-06
Mounting Plate 20-0684
Kitpack*** 72-0102
Owner’s Manual 54-0159
IRD Ground Wire 32-0583-50
Switchplate 02-1023-01
TV/SAT Switch(optional) 01-0245
European TracVision C3 system
†† North American TracVision C3 system (defaulted to DIRECTV)
††† North American TracVision C3 system (defaulted to DISH Network)
†††† North American TracVision C3 system (defaulted to ExpressVu)
* Baseplate assembly with single-output LNB
** Baseplate assembly with dual-output LNB
*** A complete listing of kitpack contents is provided in Table 2-2.
1-4
A Guide to TracVision C3

Table 1-3

TracVision C3 Packing List

Cables for the TracVision C3 are
stored beneath the antenna unit
during shipping.
Before you can start watching
satellite TV using your TracVision
antenna, you will need to activate
your IRD.Refer to Section 2.4,
“Activating the IRD,”for more
details.