![](/images/new-backgrounds/1303263/30326337x1.webp)
NOTE: Component failure due to dry cleaning solvent fumes will VOID THE WARRANTY.
E.EXHAUST REQUIREMENTS
1.General Exhaust Ductwork Information
Exhaust ductwork should be designed and installed by a qualified professional. Improperly sized ductwork will create excessive back pressure which results in slow drying, increased use of energy, over heating of the dryer, and shutdown of the burner by the airflow (sail) switches, burner
CAUTION: This dryer produces combustible lint and must be exhausted to the outdoors.
CAUTION: DRYER MUST BE EXHAUSTED TO THE OUTDOORS.
CAUTION: IMPROPERLY SIZED OR INSTALLED EXHAUST DUCTWORK CAN CREATE A POTENTIAL FIRE HAZARD.
NOTE: When a dryer is exhausted separately, it is recommended that a back draft damper be installed.
NOTE: When dryers are exhausted into a multiple (common) exhaust line, each dryer must be supplied with a back draft damper.
The ductwork should be laid out in such a way that the ductwork travels as directly as possible to the outdoors with as few turns as possible. Single or independent dryer venting is recommended.
When single dryer venting is used, for horizontal ducting the minimum duct size is
In the case of multiple (common) dryer venting, the distance from the last dryer to the outside exhaust duct outlet must not exceed 20 feet (6.1 meters), and have no more than one (1) elbow (including outside protection).
The shape of the ductwork is not critical so long as the minimum
IMPORTANT: When the ductwork approaches the maximum limits noted in this manual, a professional heating, venting, and air conditioning (HVAC) firm must be consulted for proper venting information.
15