American Dryer Corp ML-75DII installation manual MLE-75 Electric

b. Electric Models Only

MLE-75 (ELECTRIC)

ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)

IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME . When ordering, specify exact voltage.

NOTES: A. Fuse ratings are dual element, time delay, current limiting, class RK1 or RK5 ONLY.

B.Circuit breakers are thermal/magnetic (industrial) motor curve type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.

C.Circuit breakers for 3-phase (3ø) dryers must be 3-pole type.

APPLIED VOLTAGE/PHASE

KW

20

24

30

33

36

40

APPROX. AMP DRAW

208/1ø (60 Hz)	240/1ø (60 Hz)	208/3ø (60 Hz)	240/3ø (50/60 Hz)	380/3ø (50 Hz)	416/3ø (50 Hz)	460/3ø (60 Hz)
104	90	---	---	33	---	---
---	---	72	63	---	36	33
---	---	88	77	---	45	41
---	---	---	---	53	---	---
---	---	105	92	---	53	48
---	---	---	---	---	59	---

IMPORTANT: Figures shown are for non-reversing models only. For reversing models contact the factory.

IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is affixed to the left side panel/wall area behind the control door. In the case of 208 VAC or 240 VAC, the supply voltage must match the electric service specifications of the data label exactly.

IMPORTANT: The wire size must be properly sized to handle the related current.

WARNING: 208 VAC and 240 VAC ARE NOT THE SAME. Any damage done to dryer components due to improper voltage connections will automatically VOID THE WARRANTY.

NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.

IMPORTANT: 3-phase (3ø) figures shown are for a 3-wire service only.

21