SCC Tx A | OUT_4 (188) |
SCC Rx A | AUX_IN_0 (enhanced hysteresis 188) |
SCC Rx Clk | AUX_IN_1 (enhanced hysteresis 188) |
SCC RTS A | AUX_OUT_0 (open drain) |
SCC Tx B | IO_15 (RS422) |
SCC Rx B | IO_13 (RS422) |
When test mode select is “10” the following changes are made (if a signal is not listed here, its connection remains the same):
Signal Function | Driver/Receiver |
UART Rx A | IO_1 (RS422) |
UART Rx B | IO_3 (RS422) |
UART Rx C | IO_5 (RS422) |
UART Rx D | IO_7 (RS422) |
SCC RTS A | AUX_OUT_1 (open drain) |
SCC Tx B | IO_14 (RS422) |
SCC Rx B | IO_12 (RS422) |
When test mode select is “11” the following changes are made:
Signal Function | Driver/Receiver |
UART Rx A | IN_0 (RS232) |
UART Rx B | IN_1 (RS232) |
UART Rx C | IN_2 (RS232) |
UART Rx D | IN_3 (RS232) |
When test mode select is “01” the following changes are made:
Signal Function | Driver/Receiver |
UART Rx A | IN_4 (RS232) |
UART Rx B | IN_5 (RS232) |
Hardware and Software Design • Manufacturing Services
P a g e | 14 |